ЯЗЫК И ВАЛЮТА
AUTOOL 100cm Braided OBD2 Extension Cable
US$12.00
Ключевые особенности
- 16-контактный разъем между мужчинами и женщинами
- 100 cm Working Reach
- 10 mm Braided Copper Cable
- 16-Pin Male-to-Female: Extend a standard 16-pin OBD2 vehicle port to a compatible 16-pin diagnostic tool through a passive cable.
- 100 cm Working Reach: Move the scanner connection 1 m from the original vehicle port for easier positioning.
- 10 mm Braided Copper Cable: Combine a pure-copper core with a 10.00 mm nylon-braided cable body.
☰ ЗАПРОСИТЬ ОПТОВОЕ ПРЕДЛОЖЕНИЕ / B2BОфициальный запрос на коммерческое предложение
Форма запроса на загрузку...
- 3-летнюю гарантию Основной блок: 3 года · Аксессуары: 1 год
- 90-Day Returns Возврат возможен в течение 90 дней.
- Официальный магазин Оригинальная продукция · Прямая поддержка
AUTOOL OBD2 Cable · 100 cm Braided 16-Pin Extension
Move the OBD2 Connection One Meter
Move a compatible 16-pin diagnostic connection one meter from a low or recessed vehicle port with a braided copper-core cable. The passive extension adds working reach and a replaceable connection point for repeated scanner use.
- 100 cm Working Reach
- 16-Pin Male-to-Female Route
- Braided Wear Protection
- Single-Cable Package
- Passive Signal Path
Ключевые особенности
Protect a One-Meter Extension from Handling Wear
Сердечник из чистой меди
The inner conductor uses a pure copper core to help support faster data transmission and more stable diagnostic tool communication.
Protective Nylon Braided Sleeve
The cable is covered with a protective nylon braided sleeve for improved wear resistance, bend resistance, and daily workshop durability.
Flexible Insulated Outer Layer
The outer cable uses high-quality plastic and TPE material for flexibility, insulation, and leakproof protection during normal diagnostic use.
16-Pin Male-to-Female OBD-II Extension Cable
Make sure your vehicle and diagnostic device both use a standard 16-pin OBD2 interface before ordering.
One end connects to the vehicle OBD2 diagnostic interface, while the other end connects to a compatible 16-pin OBD2 diagnostic tool.
1M Practical Extension
The 100cm cable length helps extend the diagnostic connection, making it easier to position scan tools or ELM327-style adapters while working.
Repeated Plugging Durability
The cable goes through 8 inspection steps from injection to molding, and its design is intended for more than 10,000 plug-and-unplug cycles under proper use.
Braided Cable Specifications
The protective nylon braided sleeve improves wear and bend resistance. The cable has a 10.00mm diameter and a 185g net weight.
One-Meter Diagnostic Reach
The 100cm cable extends the diagnostic connection for easier scanner positioning, with a 40mm-wide connector.
Passive OBD2 Extension Cable
Routes the existing 16-pin male-to-female connection to the stated length so the scanner or accessory can be positioned more conveniently; available functions still depend on the vehicle, pinout, connected hardware, software, and protocol support.
Connection and Fit Notes
Use the cable to extend OBD2 diagnostic connections. Do not use it as a general power cable or for non-OBD wiring purposes.
10 mm Cable Diameter
Cable diameter: 10mm.
Гарантийное обслуживание в течение 3 лет
Основной блок: 3-летняя гарантия. Стандартные аксессуары: 1-летняя гарантия. Гарантийные условия.
Как использовать
Connect, Route and Check Communication
Шаг вперед1 / 5
01
Confirm The Vehicle Port
Identify the exact vehicle connector, year, and pinout; inspect it for damage.
02
Confirm The Tool Chain
Before connecting, confirm the vehicle connector, pinout, protocol, and scan-tool support for the intended task.
03
Подключитесь безопасно
Follow the vehicle and tool procedure, align connectors correctly, and never force a mismatched plug.
04
Route Without Strain
Position the cable away from pedals, sharp edges, heat, moving parts, and pinched trim.
05
Проверка связи
Run the intended read-only connection check first. If communication changes, remove added devices or the extension and compare direct connection.
Безопасность и совместимость
Check Pin Fit, Routing and Power Limits
Пассивное оборудование
This passive cable extends the physical connection; diagnostic and programming functions depend on the vehicle and connected tool.
Pinout And Fit
Match the connector shape and pin routing to the vehicle and connected tool for the intended task.
Движение автомобиля
Keep all cable and device parts clear of pedals, steering, seat tracks, doors, and driving controls.
Электрическая нагрузка
Do not attach unknown or high-current devices to vehicle diagnostic power. Follow the vehicle and tool current limits.
Disconnect If Unstable
If a tool drops connection, overheats, resets, or changes vehicle behavior, stop and return to a known direct connection.
Рекомендации по уходу и технике безопасности
Keep the 16-pin connectors dry and clean to help maintain stable contact during diagnostic communication.
Характеристики
Confirm Interface, Length and Quantity
| Параметр | Значение |
|---|---|
| Длина | 100 см |
| Connector Route | 16-pin male → 16-pin female |
| Количество в упаковке | Кабель 1 |
| Функция | Passive physical extension / pin routing; no protocol conversion |
Руководство и поддержка
Confirm Port, Pinout and Tool Fit
Центр загрузки руководства
Visit the manual download center for connected-tool guidance, then confirm 16-pin fit, one-meter routing and signal compatibility, with safe-use and troubleshooting guidance.
Комплектация
One Selected Cable
- Включенный кабель1 × 100 cm braided cable with a 16-pin male connector and a 16-pin female connector.
- Не имеетDiagnostic scanner, software, licenses, vehicle, and unlisted adapters are not included.
Часто задаваемые вопросы (FAQ)
Connector, Fit and Function Questions
Is This Cable A Diagnostic Scanner?
This passive cable extends a compatible 16-pin OBD2 connection; diagnostic functions depend on the vehicle and connected scan tool.
What Connector Type Does It Use?
It uses a 16-pin male-to-female OBD2 connector design. One end connects to the vehicle OBD2 diagnostic port, and the other end connects to a compatible 16-pin OBD2 diagnostic tool.
How Long Is The Cable?
The cable length is 100cm, which is approximately 1m or 39.37inch. The connector width shown in the size image is about 40mm / 1.57inch.
What Diagnostic Tools Can It Work With?
It is intended for diagnostic tools with a standard 16-pin OBD2 socket, including compatible OBD2 scan tools and ELM327-style adapters. Confirm the connector type on your device before ordering.
What Materials Are Used In The Cable?
The cable uses a pure copper core for stable data transmission, high-quality plastic and TPE outer materials for flexibility and insulation, and a protective nylon braided sleeve for added durability.
Is It Designed For Repeated Plugging?
Yes. The original listing describes 8 inspection steps from injection to molding and a cable design intended for more than 10,000 plug-and-unplug cycles under proper use. Avoid pulling, crushing, or sharply bending the connector during operation.
What Is Included In The Package?
The package includes 1 × AUTOOL 100cm OBD2 16-pin male-to-female extension cable. A diagnostic scanner, ELM327 adapter, software, and extra adapters are not included.
Will It Fit Every Vehicle?
It is designed for vehicles equipped with a standard 16-pin OBD2 diagnostic interface. Because vehicle ports and diagnostic tool designs may vary, confirm your vehicle port and tool connector before purchase.
Does This Cable Add Diagnostic Functions?
This passive 16-pin male-to-female cable extends a compatible OBD2 connection; scanner functions depend on vehicle and tool support.
Отзывы клиентов
Оставить отзыв
Нет отзывовBe the first to share your experience with this product.