AUTOOL Dry Ice Blaster Flat Nozzle
Prisområde: US$19.00 til US$159.00
- Flat Spray Pattern
- Photo-Assisted Fit Check
- Flat Spray Pattern: Add a flat blasting pattern to compatible HTS705, HTS708, or HTS709 setups with this separately sold nozzle.
- Photo-Assisted Fit Check: Machine and existing-nozzle photos help verify the required connection before purchase.
- Flat Spray Pattern: Add a flat blasting pattern to compatible HTS705, HTS708, or HTS709 setups with this separately sold nozzle.
- Photo-Assisted Fit Check: Machine and existing-nozzle photos help verify the required connection before purchase.
- 3-Year Warranty Main unit 3 years · Accessories 1 year
- 90-Day Returns Eligible returns within 90 days
- Official Store Genuine products · Direct support
AUTOOL Flat Dry Ice Blasting Nozzle · For HTS705, HTS708, and HTS709
Add a Flat Blast Pattern to Compatible Machines
Add a flat blasting pattern to an AUTOOL HTS705, HTS708 or HTS709 dry ice cleaning setup. This separately sold nozzle provides another pattern option for suitable surfaces and contaminants. Match the existing nozzle connection to the selected part, then test the pattern with the machine settings and surface preparation appropriate to the job.
- Flat Blasting Pattern
- For HTS705 / HTS708 / HTS709
- Separately Sold Nozzle
- Match the Existing Connection
Key Features
Add a Flat Spray Pattern
Flat-Nozzle Option
Provides a flat blasting pattern for a supported dry ice cleaning setup.
Three Named AUTOOL Models
The listing identifies use with AUTOOL HTS705, HTS708 and HTS709.
Separate Replacement Part
This flat nozzle is sold as a separate component; it is not a complete dry ice machine or a full accessory package.
Support-Assisted Matching
Machine and old-part photos can be used to verify the required connection before purchase.
3 Years Warranty Support
Main unit: 3-year warranty. Standard accessories: 1-year warranty. Warranty Policy.
How to Use
Confirm, Install, Test, and Inspect
Confirm the Machine Model
Verify that the dry ice blaster is an HTS705, HTS708, or HTS709, then identify its current nozzle connection.
Confirm the Cleaning Task
Choose a flat pattern only after considering the target material, contaminant and desired surface result.
Inspect and Install
Isolate the machine, inspect the threads/connection and install according to the machine manual.
Test on a Suitable Area
Begin with the machine’s approved conservative setup and test a small area before widening the pass.
Inspect After Use
Clear residual dry ice as directed and inspect the nozzle for blockage, wear or damage.
Safety & Compatibility
Check Fit, Surface, and Blasting Setup
Compatibility Confirmation
Do not assume the flat nozzle fits models beyond HTS705, HTS708 and HTS709.
Set Air and Media Requirements
Set compressed air and dry-ice delivery for the machine, nozzle and target surface.
Surface Test
Confirm material, coating, adhesion and cleaning goal; dry ice blasting cannot be guaranteed harmless on every surface.
PPE and Ventilation
Use eye, hearing, hand, and cold protection, and provide adequate ventilation for carbon dioxide (CO₂).
Never Aim at People
High-pressure air and low-temperature dry ice can cause injury.
Fitment Check
Match the Machine, Connection, and Cleaning Task
Model Guide
Choose one or more options. AUTOOL Dry Ice Blaster Flat Nozzle is selected by default.
| Choose For Your Task | AUTOOL Dry Ice Blaster Flat Nozzle |
|---|---|
| Fit & Use Checks | |
| Machine model | Selection Check: HTS705 / HTS708 / HTS709 Why It Matters: Confirms the named compatibility range |
| Connection | Selection Check: Photo and part check Why It Matters: Avoids ordering a similar-looking incompatible nozzle |
| Target surface | Selection Check: Test before full pass Setup: Match air pressure, dry-ice feed and machine settings to the target surface |
Manual & Downloads
Use the Manual for Your Dry Ice Blaster
Dry Ice Machine Manuals & Nozzle Guides
Visit the manual download center to find HTS705, HTS708, or HTS709 host-machine instructions plus nozzle compatibility, fit, installation, safety, and troubleshooting guidance.
Package
One Selected Flat Nozzle
- Selected Flat NozzleOne separately sold nozzle or the quantity specified by the selected order option.
- Machine and Operating SuppliesDry ice cleaner, hose, dry ice and external compressor are not included unless explicitly listed in the final option.
FAQs
Flat Nozzle Fit and Use Questions
Which machines are named for this nozzle?
AUTOOL HTS705, HTS708 and HTS709.
Does the listing include a dry ice cleaning machine?
No. It is a separately sold component listing.
Will the flat nozzle fit every AUTOOL dry ice machine?
Compatibility is established for HTS705, HTS708 and HTS709. Confirm the connection before using it elsewhere.
Does a flat nozzle make every surface safe to clean?
No. Material, coating, pressure, airflow, distance and dry ice condition still determine suitability. Test a small approved area first.
What Information Should I Provide To Support?
Please provide your machine model, the part or accessory you need, a clear photo if available, the required quantity, and your previous order information if this is an after-sales or replacement request.
- Send the machine model, photos of the existing nozzle and connection, desired quantity and the intended cleaning task.
Are AUTOOL Dry Ice Blasting Machine Components Sold Separately?
Yes. AUTOOL dry ice blasting machine components and accessories are sold separately. Please confirm the required part before purchasing.
Can I Buy A Complete Accessory Set?
If you need a set, please contact AUTOOL online customer service before ordering. Support can help confirm the set details and reduce the risk of buying the wrong components.
Does A Previous Order Help Match A Replacement Part?
Yes. Send the previous order number or purchase channel with the machine model and part photos to help support match the replacement.
Is The Product Image A Packing List?
No. The image is an accessories purchase reminder for AUTOOL dry ice blasting machines. It is not a final packing list. Please confirm the exact component or set contents with support before purchasing.
How Do I Contact AUTOOL Online Support?
You can contact AUTOOL Store by email or WhatsApp for dry ice blasting machine accessory confirmation, full set inquiries, and replacement part support.
No reviews yetBe the first to share your experience with this product.