언어 및 통화
AUTOOL 드라이아이스 블래스터 플랫 노즐
가격 범위: US$19.00 ~ US$159.00
주요 특징
- Flat Spray Pattern
- Photo-Assisted Fit Check
- Flat Spray Pattern: Add a flat blasting pattern to compatible HTS705, HTS708, or HTS709 setups with this separately sold nozzle.
- Photo-Assisted Fit Check: Machine and existing-nozzle photos help verify the required connection before purchase.
- 3 - 년 보증 본체 3년, 부속품 1년
- 90- 일 반품 90일 이내 반품 가능
- 공식 스토어 정품 · 직접 지원
AUTOOL Flat Dry Ice Blasting Nozzle · For HTS705, HTS708, and HTS709
Add a Flat Blast Pattern to Compatible Machines
Add a flat blasting pattern to an AUTOOL HTS705, HTS708 or HTS709 dry ice cleaning setup. This separately sold nozzle provides another pattern option for suitable surfaces and contaminants. Match the existing nozzle connection to the selected part, then test the pattern with the machine settings and surface preparation appropriate to the job.
- Flat Blasting Pattern
- For HTS705 / HTS708 / HTS709
- Separately Sold Nozzle
- Match the Existing Connection
주요 특징
Add a Flat Spray Pattern
Flat-Nozzle Option
Provides a flat blasting pattern for a supported dry ice cleaning setup.
Three Named AUTOOL 모델
The listing identifies use with AUTOOL HTS705, HTS708 and HTS709.
Separate Replacement Part
This flat nozzle is sold as a separate component; it is not a complete dry ice machine or a full accessory package.
Support-Assisted Matching
Machine and old-part photos can be used to verify the required connection before purchase.
3년 보증 지원
본체: 3년 보증. 표준 부속품: 1년 보증. 보증 정책.
이용 방법
Confirm, Install, Test, and Inspect
단계별 진행 상황1 / 5
01
Confirm the Machine Model
Verify that the dry ice blaster is an HTS705, HTS708, or HTS709, then identify its current nozzle connection.
02
Confirm the Cleaning Task
Choose a flat pattern only after considering the target material, contaminant and desired surface result.
03
검사 및 설치
Isolate the machine, inspect the threads/connection and install according to the machine manual.
04
Test on a Suitable Area
Begin with the machine’s approved conservative setup and test a small area before widening the pass.
05
사용 후 점검하십시오
Clear residual dry ice as directed and inspect the nozzle for blockage, wear or damage.
안전성 및 호환성
Check Fit, Surface, and Blasting Setup
호환성 확인
Do not assume the flat nozzle fits models beyond HTS705, HTS708 and HTS709.
Set Air and Media Requirements
Set compressed air and dry-ice delivery for the machine, nozzle and target surface.
표면 테스트
Confirm material, coating, adhesion and cleaning goal; dry ice blasting cannot be guaranteed harmless on every surface.
PPE and Ventilation
Use eye, hearing, hand, and cold protection, and provide adequate ventilation for carbon dioxide (CO₂).
Never Aim at People
High-pressure air and low-temperature dry ice can cause injury.
적합성 확인
Match the Machine, Connection, and Cleaning Task
모델 가이드
하나 이상의 옵션을 선택하세요. AUTOOL Dry Ice Blaster Flat Nozzle is selected by default.
1개 모델이 선택되었습니다.
선택된 모델이 없습니다. 비교할 모델을 선택하세요.
| 작업에 맞는 것을 선택하세요 | AUTOOL 드라이아이스 블래스터 플랫 노즐 |
|---|---|
| Fit & Use Checks | |
| 기계 모델 | 선택 확인: HTS705 / HTS708 / HTS709 어떤 의미에서 중요한가: Confirms the named compatibility range |
| 연결 | 선택 확인: Photo and part check 어떤 의미에서 중요한가: Avoids ordering a similar-looking incompatible nozzle |
| 대상 표면 | 선택 확인: Test before full pass 설정 : Match air pressure, dry-ice feed and machine settings to the target surface |
사용 설명서 및 다운로드
Use the Manual for Your Dry Ice Blaster
Dry Ice Machine Manuals & Nozzle Guides
Visit the manual download center to find HTS705, HTS708, or HTS709 host-machine instructions plus nozzle compatibility, fit, installation, safety, and troubleshooting guidance.
묶음
One Selected Flat Nozzle
- Selected Flat NozzleOne separately sold nozzle or the quantity specified by the selected order option.
- Machine and Operating SuppliesDry ice cleaner, hose, dry ice and external compressor are not included unless explicitly listed in the final option.
자주 묻는 질문
Flat Nozzle Fit and Use Questions
Which machines are named for this nozzle?
AUTOOL HTS705, HTS708 and HTS709.
Does the listing include a dry ice cleaning machine?
No. It is a separately sold component listing.
Will the flat nozzle fit every AUTOOL dry ice machine?
Compatibility is established for HTS705, HTS708 and HTS709. Confirm the connection before using it elsewhere.
Does a flat nozzle make every surface safe to clean?
No. Material, coating, pressure, airflow, distance and dry ice condition still determine suitability. Test a small approved area first.
What Information Should I Provide To Support?
Please provide your machine model, the part or accessory you need, a clear photo if available, the required quantity, and your previous order information if this is an after-sales or replacement request.
- Send the machine model, photos of the existing nozzle and connection, desired quantity and the intended cleaning task.
인가 AUTOOL Dry Ice Blasting Machine Components Sold Separately?
예. AUTOOL dry ice blasting machine components and accessories are sold separately. Please confirm the required part before purchasing.
Can I Buy A Complete Accessory Set?
If you need a set, please contact AUTOOL online customer service before ordering. Support can help confirm the set details and reduce the risk of buying the wrong components.
Does A Previous Order Help Match A Replacement Part?
Yes. Send the previous order number or purchase channel with the machine model and part photos to help support match the replacement.
Is The Product Image A Packing List?
No. The image is an accessories purchase reminder for AUTOOL dry ice blasting machines. It is not a final packing list. Please confirm the exact component or set contents with support before purchasing.
연락 방법 AUTOOL Online Support?
당신은 문의하실 수 있습니다 AUTOOL Store by email or WhatsApp for dry ice blasting machine accessory confirmation, full set inquiries, and replacement part support.
고객 리뷰
리뷰 남기기
리뷰가 아직 없습니다.이 제품 사용 경험을 가장 먼저 공유해 보세요.