언어 및 통화
AUTOOL OD760 Pneumatic Oil Drainer and Extractor Station
US$2,499.00
주요 특징
- 6–8 Bar Vacuum + Gravity Recovery
- 80리터 저장 탱크
- 10리터 계량컵
- 5개의 추출봉
- 6–8 Bar Vacuum + Gravity Recovery: Use 6–8 bar compressed air for vacuum extraction through five wands, or collect oil from below with the 41 cm, 20 L catch pan.
- 80리터 저장탱크: Store recovered waste oil in the 80 L, 1.5 mm-thick steel tank.
- 10리터 계량컵: View extracted oil in the transparent 10 L tempered measuring cup before transfer.
- 5가지 추출봉: Choose among five wand sizes to reach different oil-service access points.
- 61-Piece Tool Station: Keep the included 61-piece mechanic tool set organized in the integrated drawers.
- 3 - 년 보증 본체 3년, 부속품 1년
- 90- 일 반품 90일 이내 반품 가능
- 공식 스토어 정품 · 직접 지원
AUTOOL OD760 · 80 L Pneumatic Oil Extractor & 61-Piece Tool Station
Keep Oil Service and Tools Together
Combine probe extraction, gravity collection, visible oil measurement, and organized service tools in one mobile workstation. The AUTOOL OD760 routes recovered oil through a transparent measuring cup into a high-capacity storage tank, while integrated drawers keep the supplied mechanic tool set beside the service position.
- 진공 + 중력 회수
- 80리터 저장 탱크
- 10리터 계량컵
- Five Sized Extraction Probes
- 61-Piece Tool Station
주요 특징
Combine Five Probes with Organized Tools
Rapid Vacuum Extraction
Uses pressurized air and a vacuum generator for rapid pneumatic oil extraction. With 6-8bar air supply pressure, oil extraction can be completed in about 3 minutes under suitable conditions.
10L 내열 계량컵
The 10L explosion-proof tempered glass measuring cup has scale markings, high-temperature resistance, corrosion resistance, and clear visibility for checking waste oil quality and quantity.
5 Vacuum Suction Tubes
Includes five oil extraction wands for different vehicle applications: 5mm × 880mm, 6mm × 880mm, 6mm × 1090mm, 8mm × 880mm, and 8mm × 1090mm.
20L Large Oil Receiving Tray
The 20L oil catch pan has a 41cm diameter, providing a larger collection area for bottom oil drainage and helping reduce spills during service.
80L Thickened Oil Tank
The 80L storage tank and 1.5mm thickened body support leak-resistant and air-tight operation, improving durability for workshop use.
Multi-Layer Storage Cabinet
Drawer storage helps organize wrenches, bottom covers, screwdrivers, suction tubes, and daily maintenance accessories in one mobile workstation.
80 L Recovery + 61-Piece Tool Station
Multi-layer drawers and the 61-piece tool set keep common oil-service tools and extraction accessories together in one mobile station.
에어 파워
Driven by compressed air and a vacuum generator.
육안 검사
The 10L measuring cup helps observe oil quantity and condition.
Air and Vacuum Controls
Press valve, pressure gauge, vacuum generator / inlet.
오일 측정
Tempered glass measuring cup, oil extraction hose, oil level sight glass.
Storage and Service Access
Storage drawer, oil storage tank, drawer-style maintenance tool area.
Drain / Mobility
Oil catch pan, lifting rod, drain device, drain hose, handle, casters, evacuation wands.
3년 보증 지원
본체: 3년 보증. 표준 부속품: 1년 보증. 보증 정책.
이용 방법
폐유를 수집, 추출 및 배출합니다.
단계별 진행 상황1 / 5
01
공기 공급 장치를 준비하세요
Connect the specified compressed-air supply and inspect hoses, valves, tank level and the selected recovery path.
02
Choose Probe or Pan Recovery
Select a compatible extraction probe for suction removal or position the catch pan for gravity draining.
03
Collect and Monitor Oil
Build vacuum or begin gravity collection as directed, then watch the pre-chamber, tank level and every connection.
04
Transfer to the Main Tank
Close the recovery path and transfer collected oil into the storage tank using the machine controls.
05
Discharge and Vent
Secure the outlet in an approved waste container, use the separate controlled-discharge procedure and release tank pressure after transfer.
안전성 및 호환성
오일 경로, 프로브 및 공기 공급 장치를 일치시키십시오.
Separate the Air Functions
Compressed-air input, extraction vacuum and pressurized tank discharge are separate operating conditions; use the model instructions for each.
Confirm the Probe Route
Choose a probe that fits the vehicle access path without forcing, kinking or detaching.
유체 온도 제어
Work only within the conservative model-specific temperature condition and protect against hot oil and surfaces.
Use Approved Waste Oil
Do not collect gasoline, diesel, brake fluid, methanol- or ketone-containing liquids, or other flammable fluids in the unit.
Release Pressure After Use
Vent the tank through the instructed procedure before service, storage or opening a connection.
Hot Oil and Air Safety
OD760 handles hot waste oil and uses compressed air. Review these safety and operation notes before using the equipment.
Fire and Area Safety
No smoking or open flames during operation.
Keep away from high-temperature, high-pressure, flammable, and explosive areas.
누출 대응
If leakage occurs, shut off the air supply and inspect hoses or components immediately.
Burn and Eye Protection
Waste oil temperature is between 40-60°C; be cautious of burns.
During operation, protect your eyes and hands. Gloves and safety goggles are recommended.
Keep Engine Off
The engine must remain turned off throughout the operation.
Pressure Release and Cleaning
After completing the equipment operation, release the internal pressure and clean the equipment to avoid damage and personal injury caused by improper operation.
모델 비교
적합한 석유 회수 워크플로우를 선택하세요
모델 가이드
하나 이상의 모델을 선택하세요. OD760이 기본값으로 선택되어 있습니다.
1개 모델이 선택되었습니다.
선택된 모델이 없습니다. 비교할 모델을 선택하세요.
| 제품명 | OD710 | OD720 | OD760 |
|---|---|---|---|
| 컬렉션 및 워크샵 특징 | |||
| 대형 오일 팬 | ✓ | ✓ | ✓ |
| 높이 조절 가능 | ✓ | ✓ | ✓ |
| 두꺼운 탱크 구조 | ✓ | ✓ | ✓ |
| 오일 레벨 확인창 | ✓ | ✓ | ✓ |
| 360° 회전 캐스터 | ✓ | ✓ | ✓ |
| 급속 진공 추출 기술 | ✓ | ✓ | ✓ |
| 강화유리 계량컵 | ✓ | ✓ | ✓ |
| 공구함 포함 여부 | × | × | ✓ |
| 공기 및 진공 요구 사항 | |||
| 공기 공급 압력 | 6-8bar | 6-8bar | 6-8bar |
| 오일 배출 압력 | 0.6-0.8bar | 0.6-0.8bar | 0.6-0.8bar |
| 공기 소비 | 150L / 분 | 150L / 분 | 150L / 분 |
| 진공 레벨 | 0-65cmHg | 0-65cmHg | 0-65cmHg |
| 용량, 온도 및 설정 | |||
| 탱크 용량 | 30L (7.93gal) | 70L (18.5gal) | 80L (21.1gal) |
| 계량컵 용량 | 10L (2.6gal) | 10L (2.6gal) | 10L (2.6gal) |
| Oil Catch Pan Size / Capacity | 45 * 35 * 19cm | 45 * 35 * 19cm | 20L (5.3gal) |
| 작동유 온도 | 40-60 ℃ | 40-60 ℃ | 40-60 ℃ |
| 대피봉 수량 | 5 PCS | 5 PCS | 5PCS |
| 적절한 흡입 추출을 위해 리프트가 필요합니까? | × | × | × |
사용 설명서 및 지원
운항 및 공기 공급 지침을 찾아보세요
AUTOOL OD760 사용자 설명서
Open the PDF manual for OD760 vacuum extraction, gravity collection, visible oil measurement and tool-station organization, with operating safety and troubleshooting support.
패키지 내용물
탱크, 프로브 및 포함된 부품을 확인하십시오.
- Oil Filter Cap Wrench32의 개
- Cuff Oil Filter Wrench2의 개
- Square Screwdriver Bits9의 개
- Hex Screwdriver Bits7의 개
- Torx Screwdriver Bits4의 개
- 1/2 Wrench3의 개
- 3/8 Extension Bar3의 개
- Torx 렌치1 PC를
자주 묻는 질문
석유 회수 및 공기 공급 관련 질문
OD760에 필요한 공기 공급 압력은 얼마입니까?
OD760 requires 6-8bar air supply pressure for pneumatic vacuum extraction. Oil discharge pressure is 0.6-0.8bar, and air consumption is listed as 150L/min.
How Fast Can OD760 Extract Oil?
OD760 uses vacuum extraction technology and can achieve rapid oil extraction in about 3 minutes under suitable air supply and operating conditions.
What Is The Measuring Cup Capacity?
The OD760 has a 10L explosion-proof tempered glass measuring cup. After extracting waste oil, promptly empty the oil from the measuring cup into the storage tank to protect the cup and extend its service life.
Do I Need To Close The Measuring Cup Drain Valve After Emptying It?
No. After emptying the waste oil from the measuring cup, there is no need to close the measuring cup drain valve.
Can OD760 Be Used With Brake Oil, Gasoline, Or Diesel?
No. OD760 is strictly prohibited for use with brake oil, gasoline, diesel, and other liquids containing methanol, ketones, or flammable liquids.
OD710, OD720, OD760의 차이점은 무엇인가요?
OD710 is the basic oil drain / oil catcher model without vacuum extraction or measuring cup. OD720 adds a 10L measuring cup, 5 evacuation wands, and 6-8bar pneumatic extraction. OD760 is the high-end model with an 80L tank, 10L measuring cup, 20L catch pan, 5 evacuation wands, toolbox / drawer storage, and integrated workshop station design.
What Is Included In The 61-Piece Tool Set?
The 61-piece tool set includes 32 oil filter cap wrenches, 2 cuff oil filter wrenches, 9 square screwdriver bits, 7 hex screwdriver bits, 4 torx screwdriver bits, 3 pieces of 1/2 wrench, 3 pieces of 3/8 extension bar, and 1 torx wrench.
Where Can I Download The OD760 Manual?
The OD760 manual can be downloaded from the Download section of this Description. The correct manual file is AUTOOL-OD760-Manual-A4-版本20240727.pdf.
보증 기간은 얼마나 되나요?
본체: 3년 보증. 표준 부속품: 1년 보증. 보증 정책.
고객 리뷰
리뷰 남기기
Greg_fan ✓ 구매 확인 완료 -
신난다!
This thing is excellent! Works like it should and very sturdy.