언어 및 통화
SALE
AUTOOL 50cm 1-to-3 Two-Pack OBD2 Splitter Cable
가격 범위: US$24.00 ~ US$60.00
주요 특징
- Two 1-to-3 Splitters
- All 16 Pins Connected
- Plug-In Installation
- Shared-Port Device Matching
- Two 1-to-3 Splitters: Receive two 50 cm splitter cables, each with one J1962 male plug and three female sockets.
- All 16 Pins Connected: Carry the standard OBD2 pin layout across all 16 connected pins through passive wiring.
- Plug-In Installation: Add the connection points without cutting or modifying the vehicle wiring.
- Shared-Port Device Matching: Match connected devices for current draw and communication behavior before sharing vehicle power and data lines.
- 3 - 년 보증 본체 3년, 부속품 1년
- 90- 일 반품 90일 이내 반품 가능
- 공식 스토어 정품 · 직접 지원
AUTOOL OBD2 Splitters · Two 50 cm 1-to-3 Cables
Equip Two Three-Socket Connection Setups
Equip two setups with 50 cm 1-to-3 OBD2 splitters, each carrying all 16 connected pins to three sockets. Because every socket shares vehicle power and data lines, simultaneous use depends on compatible device current draw and communication behavior.
- 1 Male to 3 Female Sockets
- All 16 Pins Routed
- 50 cm Branch Reach
- Two-Cable Package
- Shared Power and Data Lines
주요 특징
Route Three Sockets from Each of Two Cables
1-to-3 OBD2 Splitter Cable
Splits one vehicle OBD2 port into three OBD2 female ports, making it easier to connect compatible OBD2 tools and accessories.
All 16 Pins Connected
The 16-pin design follows the standard OBD2 port layout and keeps all 16 pins connected for normal OBD2 extension use.
No Wire Cutting
Plug-in installation does not require cutting or modifying the original vehicle circuit, helping protect the original car wiring.
Flexible TPE Cable
The soft plastic outer case and environmentally friendly TPE material make the cable flexible, durable, and easier to route inside the vehicle.
구리심선
High-quality copper core wire supports faster and more stable signal transmission for compatible OBD2 communication devices.
Heavy-Duty Craftsmanship
Heavy-duty materials and quality craftsmanship give the cable better flexibility, longer service life, and stronger daily-use durability.
No Wire Cutting
The adapter extends the original diagnostic port through a plug-in connection, with no cutting or modification of vehicle wiring.
Two 50 cm 1-to-3 Splitters
The 50cm cable connects one J1962 male plug to three female sockets with all 16 pins connected, for compatible 12V vehicle diagnostic setups.
OBD2 Diagnostic Access
Helps connect compatible OBD2 diagnostic tools without repeatedly reaching into a tight original port area.
OBD Accessory Extension
Useful for extending the OBD2 connection point for compatible OBD accessories and in-car devices.
Diagnostic and Accessory Routing
Supports quick plug-and-play testing in maintenance, inspection, and workshop environments.
In-Car Installation
The 50cm cable and flexible case help route the connector more conveniently inside the vehicle cabin.
Passive OBD2 Port Splitter
Routes one 16-pin vehicle connection to three female sockets without protocol conversion; every socket shares the vehicle’s power and communication lines.
Shared-Port Limits
Connect multiple devices only after confirming their combined current draw and communication behavior are compatible, because all three sockets share the vehicle’s power and data lines.
12V Connection Environment
The listed voltage is 12V, making the cable suitable for standard 12V automotive OBD2 connection environments.
Multi-Device Communication Limits
Multiple devices can be connected physically, but simultaneous communication is not guaranteed and may be disrupted by device conflicts.
Preserve Original Wiring
Do not cut or modify the vehicle’s original OBD wiring when using this splitter.
3년 보증 지원
본체: 3년 보증. 표준 부속품: 1년 보증. 보증 정책.
이용 방법
통신을 연결, 라우팅 및 점검합니다.
단계별 진행 상황1 / 5
01
차량 항구를 확인하세요
차량 커넥터의 정확한 모델명, 제조년도 및 핀 배열을 확인하고 손상 여부를 점검하십시오.
02
툴체인을 확인하세요
케이블과 관계없이 스캐너, 소프트웨어, 프로토콜, 모듈, 작업 및 모든 권한 부여 사항을 확인하십시오.
03
안전하게 연결
차량 및 공구 사용 절차를 따르고, 커넥터를 올바르게 정렬하며, 맞지 않는 플러그를 절대로 억지로 끼우지 마십시오.
04
무리 없는 경로
케이블은 페달, 날카로운 모서리, 열, 움직이는 부품 및 끼인 트림에서 멀리 떨어뜨려 놓으십시오.
05
통신 확인
먼저 의도한 읽기 전용 연결 상태를 확인하십시오. 통신 상태가 변경되면 추가된 장치 또는 확장 프로그램을 제거하고 직접 연결 상태를 비교하십시오.
안전성 및 호환성
핀 맞춤, 배선 및 전력 제한을 확인하십시오.
패시브 하드웨어
Splits and extends the physical OBD2 connection while the connected tools provide diagnostic functions.
핀 배치 및 적합성
Match the connectors and pinout to the vehicle port and diagnostic tools before connection.
차량 이동
모든 케이블과 장치 부품이 페달, 스티어링 휠, 시트 레일, 도어 및 주행 제어 장치에 닿지 않도록 하십시오.
공유된 권력
Do not attach unknown or high-current devices to vehicle diagnostic power. All connected devices share the port supply.
불안정하면 연결을 끊으세요
도구의 연결이 끊어지거나, 과열되거나, 재설정되거나, 차량 동작이 변경되는 경우, 작업을 중지하고 알려진 직접 연결로 돌아가십시오.
기술 사양
인터페이스, 길이 및 수량을 확인하십시오.
| 스펙 | 가치관 |
|---|---|
| 길이 | 50의 cm |
| 연결 경로 | J1962 male → 3 × J1962 female |
| 패키지 수량 | 2 splitter cables |
| 함수 | 수동 물리적 확장/핀 라우팅; 프로토콜 변환 없음 |
사용 설명서 및 지원
포트, 핀 배열 및 공구 적합성을 확인하십시오.
매뉴얼 다운로드 센터
Visit the manual download center for connected-device guidance, then confirm each splitter’s three-socket routing, shared-line limits and device compatibility, with safe-use and troubleshooting guidance.
패키지 내용물
Two 1-to-3 Splitter Cables
- 포함된 케이블2 × 50 cm splitter cables; each has one J1962 male connector and 3 × J1962 female connectors.
- 포함되지 않음진단 스캐너, 소프트웨어, 라이선스, 차량 및 목록에 없는 어댑터는 포함되지 않습니다.
자주 묻는 질문
커넥터, 적합성 및 기능 관련 질문
이것은 AUTOOL OBD2 Splitter Cable Used For?
It is used to extend one vehicle OBD2 port into three OBD2 female ports. This makes it easier to connect compatible OBD2 diagnostic tools, OBD accessories, data devices, or in-car OBD equipment without cutting the original vehicle wiring.
Will This Cable Fit My Vehicle?
The cable is designed for vehicles with a standard OBD2 protocol port. Check that your vehicle has a standard OBD2 connector before ordering, and do not force the connector into a non-standard or damaged port.
Are All 16 Pins Connected?
Yes. All 16 pins are connected in the international-standard OBD 16-pin layout.
Can I Connect Multiple OBD2 Devices At The Same Time?
The splitter provides three OBD2 female ports and can help connect more than one compatible device. Actual simultaneous communication depends on your vehicle, OBD protocol, and the connected devices. If two devices conflict, disconnect one device and test again.
Does Installation Require Cutting The Original Car Circuit?
No. The cable is designed for plug-and-play, non-destructive installation. It does not require wire cutting and does not need modification of the original car circuit.
What Is The Cable Length?
The listed cable length is 50cm. The flexible cable helps route the connector more conveniently inside the vehicle cabin or workshop testing area.
어떤 재료가 사용되나요?
The listed material information includes nickel pin connector details, high-quality copper core wire, and environmentally friendly TPE outer material. The soft plastic case is designed to be flexible, durable, and longer lasting.
패키지 구성품은 무엇인가요?
The package includes 2 OBD2 splitter Y cables. No diagnostic scanner, OBD display, GPS tracker, or other OBD device is included.
Can I Use High-Current OBD Accessories With This Splitter?
Avoid connecting incompatible or high-current accessories through the splitter. Use compatible OBD2 devices and check the instructions of each connected device before long-term use.
Who Should I Contact For Wholesale Purchase Or Compatibility Confirmation?
문의하기 AUTOOL Store support for wholesale purchase, vehicle compatibility checks, OBD2 accessory confirmation, warranty support, and after-sales questions.
이 케이블은 진단 기능을 추가합니까?
아니요. 연결 범위, 경로, 커넥터 모양 또는 소켓 개수만 변경됩니다. 사용 가능한 기능은 차량, 핀 구성, 스캐너, 소프트웨어, 프로토콜 및 인증에 따라 다릅니다.
Will Every Connected Device Work At The Same Time?
Not necessarily. Devices share power and communication lines and can conflict. Confirm current demand and protocol behavior, then disconnect one device if communication becomes unstable.
고객 리뷰
리뷰 남기기
리뷰가 아직 없습니다.이 제품 사용 경험을 가장 먼저 공유해 보세요.