언어 및 통화
AUTOOL FN608 8-Cylinder Fuel Injector Cleaner and Tester
US$1,999.00
주요 특징
- Eight-Injector Comparison
- 12 V / 12–70 V / 120–180 V Drive
- Twin Independent Fuel Pumps
- Standalone Heated Cleaner
- Eight-Injector Comparison: Run up to eight compatible injectors together in transparent 110 ml cylinders for matched spray, leakage, and delivery comparison.
- 12 V / 12–70 V / 120–180 V Drive: Select 12 V, 12–70 V, or 120–180 V and adjust 0–40 ms pulse width in 0.1 ms steps.
- Twin Independent Fuel Pumps: Two independent pumps supply separate rails for the eight-position fixture.
- Standalone Heated Cleaner: Use the independent 550 ml, 28 kHz ultrasonic cleaner with temperature control to 50°C.
- 0–0.8 MPa Closed Loop: Set comparative test-fluid pressure from 0 to 0.8 MPa.
- 3 - 년 보증 본체 3년, 부속품 1년
- 90- 일 반품 90일 이내 반품 가능
- 공식 스토어 정품 · 직접 지원
AUTOOL FN608 · Eight-Position Twin-Pump Fuel Injector Test Bench
Compare Eight Injectors Across Twin Independent Rails
Compare up to eight compatible standard gasoline, EFI, FSI and selected GDI injectors at 0–0.8 MPa bench pressure, with two independent pumps feeding separate rails. Select 12 V, 12–70 V or 120–180 V drive and adjust 0–40 ms pulses in 0.1 ms steps for matched spray, leakage and collected-volume checks. A standalone 550 mL, 28 kHz ultrasonic cleaner with heat up to 50°C supports cleaning before retesting.
- EFI / FSI / Selected GDI
- 8-Position / Twin-Pump Testing
- 12 V / 12–70 V / 120–180 V
- 0–40 ms / 0.1 ms Steps
- Standalone Heated Ultrasonic Cleaner
주요 특징
Eight Positions with Separate Pumps and Test Paths
Eight-Injector Comparison
Run up to eight compatible injectors together in transparent 110 ml cylinders.
Twin Independent Fuel Pumps
Two independent pumps supply separate rails for the eight-position fixture. Stop the machine and inspect it according to the manual if either circuit faults.
Standalone Heated Ultrasonic Unit
Use the standalone 550 ml, 28 kHz cleaner with temperature control to 50 °C.
Extended Injector Drive Ranges
Select 12 V, 12–70 V or 120–180 V drive to match supported standard gasoline, EFI, FSI and selected GDI injector requirements, with the correct connections and procedure.
Advanced Pulse Control
Adjust 0–40 ms PWM in 0.1 ms steps, with up to 7,500 RPM and 9,900 injections.
폐쇄 루프 압력 제어
Set comparative test-fluid pressure from 0 to 0.8 MPa.
세 가지 청소 모드
Use ultrasonic cleaning, suitable top-feed reverse flush or optional-adapter no-disassembly cleaning.
Twelve Test Functions
Cover speed conditions, acceleration, variable speed, sealing, sprayability, injection shape and flow balance.
Eight-Adapter Coverage
Eight adapter groups plus a dedicated BMW adapter group support varied injector connections; verify exact fit and shipment.
GDI Injector Protection
A self-protection function supports compatible GDI test setup.
3년 보증 지원
본체: 3년 보증. 표준 부속품: 1년 보증. 보증 정책.
이용 방법
Identify, Mount, Clean, Test, and Compare Eight Positions
단계별 진행 상황1 / 7
01
Qualify The Injector Set
Record all part numbers and confirm drive range, feed style, adapters, seals and permitted cleaning method.
02
Prepare Fluids And Both Rails
Load approved ultrasonic cleaning fluid and suitable non-corrosive test fluid; inspect both pump circuits and fixtures.
03
Install And Seal The Positions
Fit compatible injectors securely and handle every unused position according to the manual.
04
Capture A Baseline
Run one appropriate test within the adjustable 0–10 minute range and record rail, voltage, pressure, pulse, speed, time and cylinder result for each injector.
05
Apply The Cleaning Method
Use heated ultrasonic, suitable top-feed reverse flush or optional no-disassembly cleaning only when approved.
06
Retest The Same Way
Repeat the baseline conditions and compare each injector with its earlier result and the matched set.
07
Record Rail And Injector Actions
Separate injector findings from any pump or rail fault, then document service, further diagnosis or replacement.
안전성 및 호환성
Confirm Injector Type, Drive, Adapter, Fluid, and Pressure
Confirm Drive And Fit
Match every injector’s part number, electrical drive, feed style, adapter and seals before energizing.
Inspect Both Pump Circuits
Do not assume the twin-pump layout makes a failed rail safe; stop and service leaks, abnormal noise or unstable pressure.
Keep Fluids Separate
Use approved cleaning fluid only in the ultrasonic unit and suitable non-corrosive test fluid in the test circuit.
Never Operate The Cleaner Dry
Fill the ultrasonic unit to the manual’s approved level before heating or sonic operation.
Control Vapor And Ignition
Ventilate the work area, wear eye protection and keep fluid away from flames, sparks and hot surfaces.
Depressurize Before Disconnecting
Stop the machine and release pressure before opening either rail, hose or injector fixture.
Use Correct Regional Power
Use the 110 or 220 V ±10%, 50/60 Hz version that matches the supply, with protective grounding.
Compare Results Under the Same Settings
Use the 0.8 MPa bench for matched comparative testing within the stated injector and pressure range; confirm high-pressure GDI performance with suitable equipment.
시험 결과
Read Spray, Leakage, and Volume Across Eight Positions
Check Rail Health First
A shared difference across one rail can indicate a pump, pressure or fixture issue. Compare rail conditions before judging injectors.
Repeat A Single-Position Difference
Reseat the adapter and seal, verify the cylinder and rerun the same settings before treating it as an injector finding.
Compare Spray Shape
Compare spray pattern and atomization across matched injectors under the same settings.
Compare Relative Delivery
Use equal-time cylinder readings for relative group and before/after comparison.
Separate Leakage From Imbalance
Dripping during the specified sealing test and low delivery under a dynamic test are different findings.
Use The Retest And Boundary
Use the 0.8 MPa bench for matched comparative testing within the stated injector and pressure range; confirm high-pressure GDI performance with suitable equipment.
모델 비교
Compare Position Count and Pump Configuration
모델 가이드
Choose one or more models. FN608 is selected by default.
1개 모델이 선택되었습니다.
선택된 모델이 없습니다. 비교할 모델을 선택하세요.
| 제품명 | CT150 | CT160 | CT200 | CT400 | CT450 | CT500 | FN602 | FN603 | FN606 | FN608 |
|---|---|---|---|---|---|---|---|---|---|---|
| 설정 및 제어 | ||||||||||
| 입력 전압 | 110 / 220V | 110 / 220V | 110 / 220V | 110 / 220V | 110 / 220V | 110 / 220V | 110 / 220V | 110 / 220V | 110 / 220V | 110 / 220V |
| 펄스 설정 | 0-20ms | 0-20ms | 0-20ms | 0-20ms | 0-20ms | 0-40ms, 단계 크기 0.1ms | 0~20밀리초 | 0~20밀리초 | 0–40 ms, 0.1 ms steps | 0–40 ms, 0.1 ms steps |
| 시간 설정 범위 | 0 - 10min | 0 - 10min | 0 - 10min | 0 - 10min | 0 - 10min | 0 - 10min | 0 - 10min | 0 - 10min | 0 - 10min | 0 - 10min |
| 시뮬레이션된 RPM 범위 | X | X | X | X | X | X | X | X | X | X |
| 지원되는 전압 설정 | 12V 고정 구동 방식이며, 12V/70V/120V 모드 선택이 불가능합니다. | 12V 고정 구동 방식이며, 12V/70V/120V 모드 선택이 불가능합니다. | 12V 고정 구동 방식이며, 12V/70V/120V 모드 선택이 불가능합니다. | 12V 70V 120V | 12V 70V 120V | 12V 70V 120V | 12 / 70 / 120V | 12 / 70 / 120V | 12 V / 12–70 V / 120–180 V | 12 V / 12–70 V / 120–180 V |
| 언어 설정 | × | × | × | × | × | 2가지 종류 (중국어, 영어) | × | × | 2가지 종류 (중국어, 영어) | 2가지 종류 (중국어, 영어) |
| 압력 게이지 표시 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| LCD 디스플레이 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| 세척 및 유체 시스템 | ||||||||||
| 시험관 부피 | 110ml | 100ml | 110ml | 110ml | 110ml | 110ml | 100ml | 110ml | 110ml | 110ml |
| 청소 탱크 용량 | 1000ml | 2000ml | 1700ml | 2000ml | 2000ml | 주문하신 상품의 탱크 용량을 확인해 주세요. | 2000ml | 2000ml | 550ml | 550ml |
| 초음파 세척력 | 70w | 70w | 70w | 70w | 70w | 70w | 70w | 70w | 70w | 70w |
| 내장 펌프 | 1 | 1 | 1 | 1 | 1 | 1 | 명시되지 않음 | 명시되지 않음 | 1 | 2 |
| 세척액 가열 | × | ✓ （45℃) | × | × | ✓ （50℃) | × | ✓ （45℃) | ✓ （45℃) | ✓ （50℃) | ✓ （50℃) |
| 액체 레벨 게이지 테스트 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| 세척액 회수 밸브 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| 탈착식 청소 탱크 | × | × | × | × | × | × | ✓ | × | ✓ | ✓ |
| 주유 펌프 수 | 1 | 1 | 1 | 1 | 1 | 1 | 명시되지 않음 | 명시되지 않음 | 1 | 2 |
| 기능 및 인젝터 적용 범위 | ||||||||||
| 기본 기능 | 3 Cleaning Functions 9 Testing Functions | 3 Cleaning Functions 9 Testing Functions | 3 Cleaning Functions 9 Testing Functions | 3 Cleaning Functions 9 Testing Functions | 3 Cleaning Functions 10 Testing Functions | 3 Cleaning Functions 12 Testing Functions | 3 Cleaning Functions 10 Testing Functions | 3 Cleaning Functions 10 Testing Functions | 3 Cleaning Functions 12 Testing Functions | 3 Cleaning Functions 12 Testing Functions |
| 어댑터 커넥터 | 3 유형 | 5 유형 | 3 유형 | 9 유형 | 9 유형 | 9 유형 | 9 유형 | 9 유형 | 9 유형 | 9 유형 |
| 인젝터 테스트 위치 | 4 연료 분사 장치 | 4 연료 분사 장치 | 6 연료 분사 장치 | 6 연료 분사 장치 | 6 연료 분사 장치 | 6 연료 분사 장치 | 4 | 6 | 6 | 8 |
| 연료 분사기 청소 유형 | 표준 연료 분사기 | 표준 연료 분사기 | 표준 연료 분사기 | Standard Fuel Injector GDI, EFI, FSI Long Fuel Injectors | Standard Fuel Injector GDI, EFI, FSI Long Fuel Injectors | Standard Fuel Injector GDI, EFI, FSI Long Fuel Injectors | Standard Fuel Injector GDI, EFI, FSI Long Fuel Injectors | Standard Fuel Injector GDI, EFI, FSI Long Fuel Injectors | Standard Fuel Injector GDI, EFI, FSI Long Fuel Injectors | Standard Fuel Injector GDI, EFI, FSI Long Fuel Injectors |
| 저임피던스 인젝터 지원 | 호환되는 제품만 사용하십시오. 인젝터 부품 번호와 구동 요구 사항을 확인하십시오. | 호환되는 제품만 사용하십시오. 인젝터 부품 번호와 구동 요구 사항을 확인하십시오. | 호환되는 제품만 사용하십시오. 인젝터 부품 번호와 구동 요구 사항을 확인하십시오. | 호환되는 제품만 사용하십시오. 인젝터 부품 번호와 구동 요구 사항을 확인하십시오. | 호환되는 제품만 사용하십시오. 인젝터 부품 번호와 구동 요구 사항을 확인하십시오. | 호환되는 제품만 사용하십시오. 인젝터 부품 번호와 구동 요구 사항을 확인하십시오. | 호환되는 제품만 사용하십시오. 인젝터 부품 번호와 구동 요구 사항을 확인하십시오. | 호환되는 제품만 사용하십시오. 인젝터 부품 번호와 구동 요구 사항을 확인하십시오. | 호환되는 제품만 사용하십시오. 인젝터 부품 번호와 구동 요구 사항을 확인하십시오. | 호환되는 제품만 사용하십시오. 인젝터 부품 번호와 구동 요구 사항을 확인하십시오. |
| 운영 및 장비 | ||||||||||
| 오일 배플 디자인 | × | × | × | × | × | ✓ | ✓ | ✓ | ✓ | ✓ |
| 작동 조건 시뮬레이션 테스트 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| 스토리지 서랍 | × | × | × | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Capacity, Fluid System & Fit | ||||||||||
| 초음파 탱크 | 명시되지 않음 | 명시되지 않음 | 명시되지 않음 | 명시되지 않음 | 명시되지 않음 | 명시되지 않음 | 2,000 ml, 45°C | 2,000 ml, 45°C | 550 ml, 50°C, standalone | 550 ml, 50°C, standalone |
| 시스템 압력 | 명시되지 않음 | 명시되지 않음 | 명시되지 않음 | 명시되지 않음 | 명시되지 않음 | 명시되지 않음 | 0~0.55MPa | 0~0.55MPa | 0~0.8MPa | 0~0.8MPa |
| Best task fit | 명시되지 않음 | 명시되지 않음 | 명시되지 않음 | 명시되지 않음 | 명시되지 않음 | 명시되지 않음 | Four-injector heated bench | Six-injector heated bench with drawer | 명시되지 않음 | Eight-injector twin-pump throughput |
사용 설명서 및 다운로드
설정 및 테스트 모드에 대해서는 설명서를 참조하십시오.
AUTOOL FN608 User Manual
Open the PDF manual for FN608 injector cleaning, twin-rail operation, eight-injector tests, drive-range and pulse control, electrical safety, and troubleshooting.
묶음
포함 된 것
- FN608 Main UnitEight-position fuel injector cleaner and tester with twin-pump rails.
- Standalone Ultrasonic UnitStandalone 550 ml heated ultrasonic cleaning module.
- Injector Adapter SetEight adapter groups plus a dedicated BMW adapter group for injector fitment.
- Pulse Signal CablesMercedes-Benz, BMW and universal pulse-harness styles, with eight leads per set.
- Rails And Fixture HardwareTwo rails, fixture rods, caps and O-rings for the eight-position setup.
- Funnel, Power Cord And ManualFilling funnel, mains cable and FN608 user manual.
자주 묻는 질문
Capacity, Pumps, and Fit Questions
How many injectors can FN608 test together?
Up to eight compatible injectors in eight transparent 110 ml cylinders.
What does the twin-pump design do?
Two independent pumps supply separate rails for the eight-position fixture. Stop the machine and inspect it according to the manual if either circuit faults.
Which drive ranges are available?
12 V, 12–70 V and 120–180 V for compatible injector applications.
Is the ultrasonic injector cleaner standalone?
Yes. The 550 ml unit can operate independently and heats cleaning fluid to 50 °C.
How is FN608 different from FN606?
FN608 adds eight positions and two independent pumps. FN606 has six positions and one pump; their control ranges are otherwise closely aligned.
Can it reverse-flush all injectors?
No. Reverse flushing is for suitable top-feed injectors.
Does no-disassembly cleaning require accessories?
Yes. This additional function requires special adapters.
Can the cylinders certify absolute flow?
Use them for controlled group and before/after comparison unless a calibration and approved limits are available.
Does FN608 reproduce full GDI rail conditions?
Maximum test-fluid pressure is 0.8 MPa for comparative bench testing; use suitable equipment for on-engine high-pressure GDI evaluation.
주문하기 전에 무엇을 확인해야 할까요?
Injector fit, drive range, adapters, seals, fluids, regional power, twin-pump service parts and the full current packing list.
고객 리뷰
리뷰 남기기
리뷰가 아직 없습니다.이 제품 사용 경험을 가장 먼저 공유해 보세요.