언어 및 통화
AUTOOL C80 On-Car Fuel and Intake Cleaner
US$109.00
주요 특징
- On-Vehicle Petrol Cleaning
- Adjustable Pressure Delivery
- Integrated 600 ml Vessel
- Multi-Region Adapter Selection
- On-Vehicle Petrol Cleaning: Route cleaning fluid through supported petrol EFI circuits and compatible throttle or intake paths without removing the injector assembly.
- Adjustable Pressure Delivery: Connect a regulated external air source, then use the 0–140 PSI gauge and regulator to set the pressure required by the approved EFI or throttle-style procedure.
- Integrated 600 ml Vessel: The 600 ml hanging vessel stores fluid and provides controlled flow beside the vehicle.
- Multi-Region Adapter Selection: Included adapter styles support many European, Asian, and US petrol cars and light trucks after connector and fuel-system confirmation.
- 3 - 년 보증 본체 3년, 부속품 1년
- 90- 일 반품 90일 이내 반품 가능
- 공식 스토어 정품 · 직접 지원
AUTOOL C80 · Portable On-Vehicle EFI Cleaner
Run Focused On-Vehicle Petrol EFI Cleaning
Clean supported petrol EFI circuits without removing the injector assembly using a 600 mL hanging vessel and regulated external air. The gauge and control valve help set fluid delivery for the selected procedure, with adapters for varied petrol-car and light-truck connections. Compatible throttle/intake and TWC-related workflows use their specified low-pressure setup, detergent and vehicle service limits.
- 600 mL Cleaning Vessel
- On-Vehicle Petrol EFI Cleaning
- Gauge & Pressure Regulator
- Throttle / Intake Service Support
- Portable Hook & Chain Setup
주요 특징
A 600 ml Vessel for Portable Fuel-System Cleaning
Non-Dismantle Fuel-Circuit Cleaning
The cleaner routes cleaning fluid through a supported petrol vehicle fuel circuit without removing the injector assembly. Under proper cleaning conditions, fuel system cleaning can help improve fuel supply, support fuller combustion, and reduce exhaust emissions.
Throttle and Intake Support
Supports compatible throttle-style and intake-related cleaning procedures with the correct low-pressure setup and fluid.
TWC-Related Workflow
Supports the applicable AUTOOL TWC-related cleaning workflow when the connection, detergent and vehicle service limits are confirmed.
Adjustable Pressure Delivery
The gauge and regulator provide adjustable pressure delivery for the selected approved procedure, with different setups for EFI cleaning and throttle-style cleaning.
Integrated 600 ml Vessel
The 600 ml vessel stores cleaning fluid and feeds it through the control valve and outlet pipe for controlled flow during service.
Wide Adapter Selection
This fuel injection cleaning kit includes adapter styles for many European, Asian, and US cars and light trucks, subject to connector and petrol fuel-system confirmation.
Portable Hanging Setup
A hook and chain support positioning the pressure vessel at the vehicle during the approved service procedure.
선박 크기
The product-detail image labels the vessel at 280 mm high and 73 mm in diameter.
3년 보증 지원
본체: 3년 보증. 표준 부속품: 1년 보증. 보증 정책.
이용 방법
Identify, Isolate, Connect, Clean, and Restore
단계별 진행 상황1 / 6
01
Identify the Fuel Circuit
Confirm petrol-system suitability, identify inlet and return routing from vehicle service information, and select the matching adapter.
02
Isolate and Connect
Connect the cleaner outlet to the approved fuel inlet path and cap or route the return side as the vehicle procedure requires. For an approved no-return setup, disable the fuel pump as instructed.
03
Add the Correct Fluid
Fill the C80 vessel with separately purchased cleaning fluid approved for the task and materials.
04
Connect External Air
Attach a suitable compressed-air supply and set the procedure-specific pressure: 40–50 PSI for EFI or 1–5 PSI for throttle-style work, subject to vehicle confirmation.
05
Leak-Check and Clean
Inspect every connection before starting the engine. Stop immediately if fuel or cleaning fluid leaks, then perform only the approved cleaning procedure.
06
Depressurize and Restore
Shut down, relieve vessel and line pressure, restore the original fuel circuit, and make a final leak check before returning the vehicle.
안전성 및 호환성
Control Fluid, Pressure, Connections, and Ventilation
Gasoline Vehicle Scope
Use C80 only where the petrol fuel-system layout, fluid and adapter can be confirmed; do not assume diesel or high-pressure test capability.
External Air Required
Use a regulated compressed-air source and never treat the 0–140 PSI gauge range as the required working pressure.
No-Leak Start Condition
Do not start the engine until every connection is secure and dry; stop the operation immediately if leakage appears.
Fire and Ventilation Controls
Keep ignition sources away, provide effective exhaust ventilation and suitable fire protection, and wear eye and hand protection.
Correct Cleaning Fluid
Cleaning fluid is not included. Use only a fluid approved for the service path and follow its SDS and handling instructions.
릴리스 압력
Relieve vessel and hose pressure before opening the cap or disconnecting any line.
모델 비교
Choose an On-Vehicle Cleaning Kit
모델 가이드
Choose one or more options. EFI Fuel-Circuit Cleaning is selected by default.
1개 모델이 선택되었습니다.
선택된 모델이 없습니다. 비교할 모델을 선택하세요.
| Choose For Your Task | EFI Fuel-Circuit Cleaning | Throttle-Style Cleaning |
|---|---|---|
| Workflow & Inputs | ||
| Vehicle state | On vehicle | On vehicle |
| Procedure pressure | 40~50PSI | 1~5PSI |
| 필수 입력값 | External air, approved fluid, matching adapter | External air, approved fluid, matching nozzle/adapter |
| Measured result | No individual injector measurement | No individual injector measurement |
Manual & Downloads
Use the Manual for Setup and Cleaning Procedures
AUTOOL C80 Manual & Guides
Visit the manual download center to find model-specific C80 setup, petrol EFI cleaning, adapter selection, fluid-pressure safety, maintenance, and troubleshooting guidance.
묶음
포함 된 것
- C80 Cleaner1 pressure-vessel cleaner assembly.
- 어댑터 키트1 adapter-kit group with connector styles, hoses, and related accessories.
- Manual and FunnelConfirm the final shipment revision.
- 세척액포함되지.
자주 묻는 질문
EFI Cleaner Setup Questions
Is C80 an injector flow-test bench?
C80 cleans the fuel and intake system on the vehicle; use a bench tester when individual injector spray, leakage, or flow comparison is required.
Does C80 Need An External Air Source?
Yes. C80 requires a suitable regulated external compressed-air source connected to its air inlet; use the pressure gauge and regulator to set the required cleaning pressure.
Is Cleaning Liquid Included?
No. Purchase suitable cleaning fluid separately and confirm that it is approved for the task and materials before using C80.
What Pressure Should I Use For EFI Cleaning?
For EFI model cleaning, connect the external air source to the air port of the cleaner and adjust the pressure to 40-50 PSI.
- The EFI procedure uses 40–50 PSI and throttle-style work uses 1–5 PSI. Confirm the setting for the specific vehicle and approved procedure.
Does the kit fit every petrol vehicle?
Confirm that the vehicle’s fuel-line layout and the selected adapter match before ordering or connecting the cleaner.
What Should I Do If There Is No Fuel Return Hose?
If there is no return hose, remove the fuel pump fuse so the fuel pump will not work during the cleaning setup. Check all connection points and confirm there is no leakage before starting the engine.
- Use only the approved vehicle-specific setup. C80’s no-return-line procedure calls for disabling the fuel pump; verify the current instructions before work.
Will cleaning reduce emissions or restore performance?
Those outcomes are not guaranteed. C80 provides a cleaning procedure; vehicle results depend on the deposit, fault cause, fluid, setup and condition.
보증 기간은 얼마나 되나요?
본체: 3년 보증. 표준 부속품: 1년 보증. 보증 정책.
이것은 AUTOOL C80 Used For?
AUTOOL C80 is used for non-dismantle fuel injector cleaning, fuel system cleaning, intake system cleaning, throttle valve cleaning, fuel nozzle cleaning, and TWC-related cleaning workflows under proper conditions.
Does C80 Require Removing The Fuel Injector?
No. C80 is designed as a non-dismantle auto injector cleaner, so it can clean the injector, throttle, and fuel system through the connected cleaning circuit without removing the injector assembly.
What Vehicles Does C80 Fit?
The kit is intended for many USA, EU, and Asia cars and light trucks. Because vehicle fuel line layouts and connector styles vary, confirm the adapter match before cleaning.
How Do I Identify The Fuel Inlet And Return Hose?
Generally, the inlet hose is bigger and the return hose is smaller. A filter is usually connected on the inlet hose side, and a buffer is usually on the return side. Some hoses also have an arrow showing the fuel flow direction.
패키지 구성품은 무엇인가요?
The package includes 1 pc fuel injector cleaner and 1 adapter-kit group, plus hoses, connector accessories, a manual, and a funnel. Cleaning liquid is not included.
What Are The Main Specifications?
The main specifications are a 0–140 PSI gauge range, 600 ml tank capacity, and 4.0 kg weight. Reference cleaning pressures are 40–50 PSI for EFI and 1–5 PSI for throttle-style work, subject to vehicle and procedure confirmation.
How Can I Confirm Adapter Fitment Or Cleaning Setup?
문의하기 AUTOOL Store before ordering or before cleaning if you need help confirming adapter fitment, cleaning fluid, EFI pressure, throttle pressure, fuel hose connection, or package contents.
What Pressure Should I Use For Throttle-Style Cleaning?
For throttle-style systems, use the same connection method as EFI cleaning but adjust the air-source pressure to 1–5 PSI.
고객 리뷰
리뷰 남기기
Jerel Leuschke ✓ 구매 확인 완료 -
좋아 보인다
내가 추천 AUTOOL
Marjolaine Mueller ✓ 구매 확인 완료 -
very quickly!
정말 빠른 배송!
Vojtech Zika ✓ 구매 확인 완료 -
AUTOOL C80 Auto Injector Cleaner Non-Dismantle Auto Fuel Injector Cleaner
AUTOOL C80 Auto Injector Cleaner Non-Dismantle Auto Fuel Injector Cleaner