언어 및 통화
AUTOOL 68-Piece Automotive Test Lead Kit
US$76.00
주요 특징
- 68-Piece Test-Lead Set
- Back-Probe + No-Cut Access
- Multiple Terminal Sizes
- Probe-Length Options
- 68-Piece Test-Lead Set: Combine probes, clips, banana adapters, and color-coded jumper wires for compatible meters and scopes.
- Back-Probe + No-Cut Access: Check fitted terminals and current paths without unnecessary wire cutting when the chosen adapter fits.
- Multiple Terminal Sizes: Use blue, yellow, red, and black jumper groups across varied connector sizes.
- Probe-Length Options: Choose 12.5 cm test probes or 23 cm probe leads for different access points.
- 105 cm Extension + Case: Extend the setup with red and black leads and organize all 68 pieces in the EVA case.
- 3 - 년 보증 본체 3년, 부속품 1년
- 90- 일 반품 90일 이내 반품 가능
- 공식 스토어 정품 · 직접 지원
AUTOOL 68-Piece Automotive Test Lead Kit
Match More Terminals Without Cutting Wires
Match a wider range of fitted vehicle terminals without unnecessary wire cutting. The 68-piece test lead kit combines back probes, color-coded jumper groups, clips, banana adapters, and two probe-length options for compatible multimeters and scopes. Extension leads add working reach, while the EVA case keeps the connection set organized.
- 68-Piece Connection Set
- 12.5 + 23 cm Probe Options
- 105 cm Banana Extensions
- 12V / 24V Vehicle Circuits
- EVA 보관 케이스
주요 특징
68 Probes, Clips, Jumpers and Adapters
Probe and Adapter Access
When checking parts, the automotive multimeter test leads can connect directly to the back of terminals without damaging the circuit, helping reduce circuit corrosion and avoid increased impedance. When checking current, connect the circuit to the test wire without cutting the original wire.
Portable And Organized
The compact EVA carrying case protects the measuring leads and keeps probes, clips, adapters, and jumper wires organized for indoor, outdoor, workshop, and mobile diagnostic use.
12V / 24V Meter + Scope Set
Use the set with compatible current meters, multimeters, and oscilloscope probes to check sensors, actuators, connector terminals, and wiring paths without unnecessary wire cutting. It supports compatible 12 V and 24 V cars, RVs, trucks, ships, and suitable laboratory, home, and industrial electrical tests.
Organized Carrying Case
The EVA case keeps the 68-piece set of probes, clips, adapters, and jumper wires together for workshop and mobile diagnosis.
Color-Coded Terminal Leads
Blue, yellow, red, and black jumper wires offer multiple terminal sizes for different connector and circuit testing needs.
Probes For Terminal Testing
The set includes 12.5cm test probes and 23cm probe leads for terminal back-probing and electrical diagnosis.
Banana Plug Adapters
Compact banana plug adapters connect the leads to compatible meters and test equipment.
LED And Potentiometer Leads
A 15cm bi-color LED test lead and a 15cm potentiometer test lead support sensor, actuator, and circuit signal checking.
Extended Lead Reach
The red and black test connection leads have a 105cm length for extending compatible test setups.
Clip-On Connections
Red and black alligator clips provide clip-on test connections as part of the 68-piece lead set.
3년 보증 지원
본체: 3년 보증. 표준 부속품: 1년 보증. 보증 정책.
서비스 워크플로
Select the Terminal Fit Before Connecting
단계별 진행 상황1 / 5
01
Choose the Adapter
Match the connector, terminal size and probe style to the intended test point without forcing or spreading the vehicle terminal.
02
등급 확인
Use the lowest input and CAT limit in the complete meter-lead-probe path and confirm the circuit is within that rating.
03
Inspect the Lead
Do not use a lead with damaged insulation, loose metal, contamination or a bent connector.
04
Connect in a Safe State
De-energize or place the circuit in the condition required by the vehicle procedure before changing adapters; keep fingers behind guards.
05
Measure and Restore
Make the supported measurement, then remove the adapters and check that the vehicle terminal and seal are restored without damage.
안전한 사용
Avoid Spreading Pins or Bypassing Protection
The Lowest Rating Governs
The complete path is limited by the lowest rating of the meter, input terminal, fuse, lead, probe and adapter. The kit does not add a CAT or high-voltage rating.
Protect the Vehicle Terminal
Choose the matching terminal size and never force a probe into a connector; spreading or scratching a terminal can create a new intermittent fault.
Inspect Insulation and Metalwork
Do not use a lead with damaged insulation, loose exposed metal, contamination, heat damage or a bent connector.
Change Connections Safely
De-energize or place the circuit in the state required by the vehicle procedure before changing adapters, and keep fingers behind the probe guards.
기술 사양
Test Lead and Adapter Specifications
| 스펙 | 가치관 |
|---|---|
| Kit size | 68 조각 |
| 상품 유형 | Multimeter test-lead and probe adapter set |
사용 설명서 및 지원
Find the Manual and Measurement Guidance
AUTOOL 68-Piece Test Lead Kit Manual & Guides
Visit the manual download center to find compatible meter or oscilloscope host guides, then confirm terminal size, adapter fit, lead routing and safe test connections.
패키지 내용물
Adapter Kit Package Contents
- 포함 항목Main Storage EVA carrying case
- 포함 항목Test Leads Test leads with banana plugs, red / black extension leads, and probe leads
- 포함 항목Adapters And Clips Banana plug adapters and 32A / 1000V red / black clips
- 포함 항목Special Leads Potentiometer test lead and bi-color LED test lead
- 포함 항목Jumper Wires Blue, yellow, red, and black jumper wires with multiple terminal sizes
- 포함 항목Use With Compatible multimeters, current meters, or oscilloscope probes
구매자 질문
Electrical Connection and Measurement Questions
이것은 AUTOOL 68PCS Test Lead Set Used For?
It is used for diagnosing, testing, and repairing complex vehicle circuits. It can also help troubleshoot sensors, actuators, electronic circuits, connector terminals, and wiring paths.
Can It Be Used On 12V And 24V Vehicles?
Yes. The kit is suitable for 12V and 24V cars, RVs, trucks, ships, and other vehicle electrical systems. It can also be used in laboratories, homes, and industrial electrical testing scenarios.
Does This Kit Include A Multimeter?
No. This is a test lead and adapter kit. Use it with a compatible multimeter, current meter, or oscilloscope probe.
Can I Test Circuits Without Cutting Wires?
Yes. The kit is designed to help users connect to compatible terminals without unnecessary wire cutting. Correct adapter size, intact insulation and the complete measurement-path rating still have to be confirmed.
What Is The Difference Between 48PCS, 68PCS, And 92PCS?
48PCS is more suitable for basic circuit testing needs. 68PCS is the main kit on this page and provides a more complete set for automotive circuit diagnosis, sensor / actuator testing, and multi-terminal connection. 92PCS is better for users who need more leads, terminals, adapters, and accessories.
Is It Easy To Carry?
Yes. The kit includes an EVA carrying case. The case image shows an approximate size of 26 × 21 × 8cm, making it convenient for workshop, outdoor, and mobile diagnostic use.
고객 리뷰
리뷰 남기기
리뷰가 아직 없습니다.이 제품 사용 경험을 가장 먼저 공유해 보세요.