언어 및 통화
AUTOOL LM708 R134a 및 R1234yf 회수 장비
US$5,999.00
주요 특징
- Independent Dual-Refrigerant Circuits
- Touchscreen Automatic Service
- Five Dedicated Scales
- 20,000+ Vehicle Records
- Independent Dual-Refrigerant Circuits: Separate R134a and HFO-1234yf circuits and onboard tanks reduce changeover and cross-contamination risk.
- Touchscreen Automatic Service: Preset the job, then run recovery, evacuation, hold checking, and recharge through 7-inch touchscreen prompts.
- Five Dedicated Scales: Weigh both refrigerant tanks, PAG oil, POE oil, and used oil separately.
- 20,000+ Vehicle Records: Start job setup from more than 20,000 vehicle records or customized service data.
- Low-, High- & Dual-Side Charging: Choose low-side, high-side, or combined high- and low-side filling.
- 3 - 년 보증 본체 3년, 부속품 1년
- 90- 일 반품 90일 이내 반품 가능
- 공식 스토어 정품 · 직접 지원
AUTOOL LM708 · Dual-Circuit R134a and R1234yf Service Station
Service R134a and R1234yf in Separate Circuits
Service R134a and HFO-1234yf vehicles with independent refrigerant circuits and tanks. The 7-inch touchscreen guides recovery, evacuation, pressure/vacuum-hold checks and recharge, with three filling paths to suit the job. Five scales separately weigh both refrigerants, PAG oil, POE oil and used oil; a vehicle database, custom data and printed records support setup and service documentation.
- Independent R134a / HFO-1234yf
- 5 Separate Fluid Scales
- 7-Inch Guided Touchscreen
- 3 Filling Paths
- Vehicle Data & Printed Records
주요 특징
Independent R134a and R1234yf Circuits
Independent Dual-Refrigerant Systems
LM708 is a dual-refrigerant machine for A/C service, with independent R134a and HFO-1234yf circuits and onboard tanks, reducing tank changes and cross-contamination risk.
Automatic Configured Workflow
After parameters are preset, LM708 runs recovery, evacuation, pressure/vacuum-hold leak checks, and recharge in sequence with touchscreen prompts.
Five Dedicated Scales
Weigh the two refrigerant tanks, PAG oil, POE oil and used oil separately.
차량 데이터베이스
Start setup with a database of over 20,000 vehicle models or enter custom service data, then verify the values against the vehicle and current OEM information.
Protected New-Oil Storage
Oil-bottle design limits new oil’s exposure to ambient air/moisture; separate PAG, POE and used-oil positions organize handling.
Recovered-Refrigerant Cleaning
Filter and separator clean recovered refrigerant for reuse when condition, procedure and local rules allow.
Three Filling Methods
Select low-pressure, high-pressure or combined high- and low-pressure hose filling to suit the service procedure.
7인치 터치스크린
Follow setup prompts and service status on the 7-inch touchscreen. Dedicated oil bottles and the built-in printer support fluid handling and job records.
Printed Service Records
Output maintenance data and operation records for the job file.
Four Languages
Choose English, German, Spanish or Chinese for the operating interface.
60 L/min Evacuation
Evacuate the system with the rated 60 L/min vacuum pump as part of the A/C service cycle.
100 kg Filter Cycle
Replace the filter-drier after each 100 kg of recovered refrigerant; use reset password 8609 only when the prescribed prompt is absent.
5 High-Precision Electronic Scales
Monitor R134a, HFO-1234yf, PAG oil, POE oil and used oil on five separate scales.
정격 전력
The LM708 is rated at 1100 W.
3년 보증 지원
본체: 3년 보증. 표준 부속품: 1년 보증. 보증 정책.
이용 방법
Identify Refrigerant, Select Circuit, Service, and Verify
단계별 진행 상황1 / 6
01
Identify Refrigerant And Vehicle Requirements
Confirm R134a or HFO-1234yf, exact charge, PAG/POE oil and hybrid/EV procedures from reliable sources.
02
Select The Matching Circuit
Use only the dedicated refrigerant path, tank and couplers for the confirmed gas.
03
Inspect And Enter The Job
Check tank protection, hoses, scales, oil and power; use database/manual entry and verify every value.
04
Run Recovery, Evacuation And Hold Check
Monitor touchscreen prompts and stop for any failed check or contamination concern.
05
Add Correct Oil And Charge
Choose only an approved charge path and measured refrigerant/oil values.
06
Print, Verify And Disconnect
Review pressures and cooling performance, print the service record and disconnect safely.
안전성 및 호환성
Keep Refrigerant, Oil, Couplers, and Circuits Separate
Never Cross-Connect Refrigerants
Use the independent R134a or HFO-1234yf system matching the identified vehicle refrigerant.
Keep Overfill Protection Enabled
Do not disable protection; keep the specified tank on its load platform and use only manufacturer-approved tanks.
눈과 손을 보호하는 장비를 착용하세요.
Liquid refrigerant can cause frostbite and eye injury; ventilate and follow the refrigerant/oil safety information.
Isolate Power For Service
Disconnect power before disassembly or maintenance and use grounded regional-nameplate power.
Confirm PAG/POE And High Voltage
For hybrid/EV work, follow the exact OEM oil chemistry and high-voltage procedure.
Follow Up the Hold Check
A failed automatic check requires inspection and separate approved diagnosis.
Extension Cable Conductor Size
Avoid extension power cables with a copper-core cross-section below 1.5 mm².
인화성 물질을 가까이 두지 마십시오.
Do not store gasoline or other flammable substances near the equipment.
시험 결과
Verify Each Refrigerant Service Stage
Five Scale Records
After confirming the refrigerant and oil identity, use the five scales to document fluid movement during the selected service procedure and compare the amounts with the applicable OEM criteria.
Vacuum/Hold Result
If the hold check fails, verify the connections and continue with an approved leak-location method.
Database Values
Treat installed vehicle data as a starting point and verify against vehicle label/OEM information.
Printed Record
Document entered and measured service values, then complete any local recordkeeping requirements.
Post-Service Performance
Abnormal pressures or poor cooling require further electrical, airflow, mechanical or leak diagnosis.
모델 비교
Compare Single- and Dual-Refrigerant Stations
모델 가이드
하나 이상의 모델을 선택하세요. LM708이 기본값으로 선택되어 있습니다.
1개 모델이 선택되었습니다.
선택된 모델이 없습니다. 비교할 모델을 선택하세요.
| 제품명 | LM707 | LM708 | LM806 |
|---|---|---|---|
| Service Scope & Compatibility | |||
| Supported Refrigerant Types | R-134a | HFO-1234yf / R-134a | R-134a |
| 기본 기능 | Refrigerant Recharge, Refrigerant Recovery, Vacuum Pumping, Filling | Refrigerant Recharge, Refrigerant Recovery, Vacuum Pumping, Filling | Refrigerant Recharge, Refrigerant Recovery, Vacuum, Pipeline Flushing |
| 자동 모드 | ✓ | ✓ | ✓ |
| 적용 차량 모델 | Fuel Vehicles, Hybrid Vehicles, New Energy Vehicles | Fuel Vehicles, Hybrid Vehicles, New Energy Vehicles | Fuel Vehicles, Hybrid Vehicles, New Energy Vehicles |
| Interface & Equipment | |||
| 입력 전압 | Regional version; confirm the exact nameplate. | Regional version; confirm the exact nameplate. | Regional version; confirm the exact nameplate. |
| 디스플레이 | 5 인치 디스플레이 | 7 인치 터치 스크린 | 10.1 인치 터치 스크린 |
| 언어 | 6 | 4 | 5 |
| 기기 외관 | Built-in Refrigerant Tank, More Compact and Aesthetic Design Added Back Panel for Direct Access to Maintenance | Built-in Refrigerant Tank, More Compact and Aesthetic Design Added Back Panel for Direct Access to Maintenance | Built-in Refrigerant Tank, More Compact and Aesthetic Design Added Back Panel for Direct Access to Maintenance |
| Fluid Handling & Capacity | |||
| Add Refrigerant Oil | Manual | Automatic | Automatic |
| Refrigerant Recovery Rate | 0.85 | Confirm the recovery rate and measurement conditions for your version. | >350 g/min |
| 냉매탱크 용량 | 18kg (Maximum Fill 12kg) | Confirm each selected-version tank rating and permitted fill. | 18kg (Maximum Fill 12kg) |
| Number of Oil Bottles | 2 (1 New oil bottle, 1 used-oil bottle) | 3 (2 New oil bottle, 1 used-oil bottle) | 3 (2 New oil bottle, 1 used-oil bottle) |
| 오일병 용량 | 350ml | 350ml | 500ml |
| Number of Electronic Scales | 1 | 5 | 4 |
| Filling Method Selection | × | HP/LP/HP+LP | HP/LP/HP+LP |
| Internal Refrigerant Circulation Purification | ✓ | ✓ | ✓ |
| Records & Diagnostics | |||
| 데이터 인쇄 | × | ✓ | ✓ |
| 내장 데이터베이스 | × | ✓ | ✓ |
| Operation Record Inquiry | × | ✓ | ✓ |
| System Automatic Leak Detection | × | Automatic pressure/vacuum hold check; follow up a failed result with an approved leak-location method. | ✓ |
사용 설명서 및 다운로드
설치 및 서비스는 설명서를 참조하십시오.
AUTOOL LM708 사용자 설명서
Open the PDF manual for LM708 dual-refrigerant recovery, evacuation, recharge, fluid scales, filling methods, circuit separation, maintenance, safety, and troubleshooting.
묶음
포함 된 것
- LM708 본체Dual-system refrigerant recovery machine.
- Red And Blue Service HosesService hoses for the matching refrigerant circuit.
- R134a And HFO-1234yf Quick ConnectorsRefrigerant-specific couplers.
- Regional Power CableConfirm plug and exact unit nameplate.
- 사용 설명서LM708 documentation.
자주 묻는 질문
Dual-Refrigerant Setup and Service Questions
What Refrigerants Does LM708 Support?
LM708 supports R134a and HFO-1234yf through independent refrigerant systems.
냉매를 식별할 수 있나요?
Confirm refrigerant and oil identity before selecting a service circuit; this unit does not identify the fluids.
What Is The Capacity Of Each Refrigerant System?
Published information lists 10 kg for each refrigerant system and also shows 12 kg × 2 internal tanks. Confirm both installed tank labels on the selected machine and follow their stated fill limits.
What do the five scales monitor?
R134a tank, HFO-1234yf tank, PAG oil, POE oil and used oil.
Is the database a substitute for OEM information?
No. Verify the installed record against the vehicle label and current OEM data.
Does automatic leak detection locate a leak?
No. Treat it as a pressure/vacuum-hold check and use separate approved diagnosis to find a leak.
Which charge paths are available?
LP, HP and combined HP+LP, used only when permitted by the service procedure.
When Should I Replace The Filter Drier?
Replace the filter drier for every 100kg of refrigerant recovered. Contact AUTOOL support when purchasing or replacing filter-related parts.
- Replace it after each 100 kg of recovered refrigerant. Use 8609 only when the current manual calls for that reset and the prescribed prompt is absent.
Can it service hybrid and EV A/C?
Only compatible R134a or HFO-1234yf systems with the exact OEM oil and high-voltage procedure.
Does it print service records?
Yes, the built-in printer outputs maintenance/operation data.
Is LM708 Fully Automatic?
Yes. After presetting parameters, LM708 can automatically perform refrigerant recovery, vacuuming, leak detection, and refilling according to the selected workflow.
What Are The Three Refilling Methods?
LM708 supports LP low-pressure hose filling, HP high-pressure hose filling, and HP+LP combined filling.
What Is The Filter Reset Password?
After replacing the filter, reset it on the device page. If the device does not prompt you, enter the universal password 8609 to complete the operation.
Why Is Overfilling Protection Important?
The refrigerant tank contains liquid refrigerant. Overfilling may cause an explosion, so do not turn off overfilling safety protection. The refrigerant tank should always stay on the load unit platform during operation.
What Safety Gear Should I Wear?
Wear safety glasses and gloves. Liquid refrigerant contact may cause frostbite and blindness. If contact occurs, flush the affected area with plenty of water and consult a physician immediately.
Can I Use Any Refrigerant Tank?
No. Use only the special refrigerant tank recommended by the manufacturer.
Does LM708 Support Printing?
Yes. LM708 is equipped with a printer for maintenance data printing, operation records, and service documentation.
고객 리뷰
리뷰 남기기
Trevon McKenzie ✓ 구매 확인 완료 -
The AUTOOL LM708 is a reliable and efficient refrigerant machine.
The AUTOOL LM708 is a reliable and efficient refrigerant machine. It supports both R-134a and HFO-1234yf systems, making it versatile for different vehicles. The automatic recovery, evacuation, and charging functions make operation simple and convenient for automotive AC service
Ada Chapman ✓ 구매 확인 완료 -
Very nice machinery came packaged beautifully honestly and the delivery drivers…
Very nice machinery came packaged beautifully honestly and the delivery drivers were great. 10/10 experience
위스닉 미할 ✓ 구매 확인 완료 -
Process Automated & Super Easy To Operate!!!
저는 최근에 그것을 얻었습니다 AUTOOL LM708 Fully Automatic Machine for HVAC automotive recovery and recharge (designed for both R134 and HFO1234yf), and I must say it has exceeded all my expectations. Over the course of roughly thirty operational cycles, this machine has demonstrated exemplary reliability, operating flawlessly without even the slightest hiccup. Its robust construction and precision-engineered components inspire confidence; there has been no indication of leakage or mechanical compromise whatsoever.
Beyond its mechanical resilience, the AUTOOL LM708 truly shines when it comes to user-friendliness. The interface is so intuitively structured and straightforward that even my children could navigate its functions—making it equally accessible for technicians of varying skill levels. The step-by-step automation streamlines the entire recovery and recharge process, minimizing the risk of user error and expediting workflow. It’s both refreshingly simple to set up and remarkably efficient to operate, which translates into valuable time savings in a professional garage environment.