{"id":24786,"date":"2021-06-03T20:26:02","date_gmt":"2021-06-03T12:26:02","guid":{"rendered":"https:\/\/shop.autooltech.com\/product\/autool-bt760-car-battery-tester-with-printer-6-32v-color-screen-battery-test-cranking-test-charging-test-max-load-test\/"},"modified":"2026-05-20T02:31:07","modified_gmt":"2026-05-20T10:31:07","slug":"autool-bt760-battery-load-tester-with-printer","status":"publish","type":"product","link":"https:\/\/autoolstore.com\/nb\/product\/autool-bt760-battery-load-tester-with-printer\/","title":{"rendered":"AUTOOL BT760 Battery Load Tester with Printer"},"content":{"rendered":"
\n
\n
\n
\n
AUTOOL BT760<\/div>\n

Product Overview<\/h2>\n

The AUTOOL BT760 battery tester is a color-screen automotive battery system tester with a built-in thermal printer. It uses conductance testing technology to help check battery health, cranking performance, charging system status, maximum load condition, voltage, current, resistance, SOH, SOC, and ripple data, then prints the test result in seconds for workshop records or customer reports.<\/p>\n

\n Battery Test<\/span>\n Cranking Test<\/span>\n Charging Test<\/span>\n Load Test<\/span>\n Data Printing<\/span>\n HD Color Screen<\/span>\n <\/div>\n
\n
3.2"<\/span>Color Screen<\/span><\/div>\n
8-30V<\/span>Voltage Test Range<\/span><\/div>\n
12V \/ 24V<\/span>Battery Systems<\/span><\/div>\n
3 Years<\/span>Warranty Support<\/span><\/div>\n <\/div>\n <\/div>\n
\n
\n \"AUTOOL\n \n Click to enlarge<\/span>\n <\/figure>\n
\n \"AUTOOL\n \n Click to enlarge<\/span>\n <\/figure>\n <\/div>\n <\/div>\n <\/section>\n\n
\n
\n
\n
Product Comparison<\/div>\n

Product Comparison<\/h2>\n

BT760 is positioned as a printer-equipped color-screen model in the AUTOOL BT battery tester range. Compare the screen size, printing function, load test, thermal monitor, leakage current monitoring, lithium battery support, and voltage range before choosing.<\/p>\n

\n
BT760 Focus<\/span>Choose BT760 if you need a 3.2-inch color screen, built-in thermal printer, battery test, cranking test, charging system test, maximum load test, data records, and 12V \/ 24V lead-acid battery system testing.<\/strong><\/div>\n
BT360 \/ BT460<\/span>BT360 and BT460 are lower-cost battery testers without data printing. BT460 adds maximum load test compared with BT360.<\/strong><\/div>\n
BT880<\/span>BT880 keeps data printing and adds thermal monitor plus leakage current monitoring. It is better if current leakage and temperature monitoring are required.<\/strong><\/div>\n
BT960<\/span>BT960 is the stronger choice if you need lithium battery support or a wider 0-80V voltage test range. BT760 does not support lithium batteries.<\/strong><\/div>\n
Buying Check<\/span>All listed BT models support battery test, cranking test, charging system test, reverse polarity protection, color screen, and 12V \/ 24V rated battery systems. None of them works as a battery charger.<\/strong><\/div>\n <\/div>\n <\/div>\n
\n \"AUTOOL\n Click to enlarge<\/span>\n <\/figure>\n <\/div>\n <\/section>\n\n
\n
\n
Key Features<\/div>\n

Key Features<\/h2>\n

BT760 combines multi-system battery diagnosis, one-click data printing, a clear color display, broad lead-acid battery compatibility, multiple language settings, and portable storage for daily workshop battery testing.<\/p>\n <\/div>\n

\n
\n

Battery, Cranking, Charging And Load Test<\/h3>\n

Check the overall battery condition, starting system, charging system, and maximum load condition. The tester helps identify whether the battery is good, weak, or should be replaced.<\/p>\n <\/article>\n

\n

Built-In Thermal Printer<\/h3>\n

Print battery test reports directly from the tester. This is useful for repair shops that need quick paper records or customer-facing diagnostic receipts.<\/p>\n <\/article>\n

\n

3.2-Inch HD Color Screen<\/h3>\n

The color display presents test menus and measurement results clearly, making battery test, cranking test, charging test, load test, language settings, and help menus easier to read.<\/p>\n <\/article>\n

\n

Wide Lead-Acid Battery Coverage<\/h3>\n

Suitable for conventional flooded, AGM flat plate, AGM spiral, GEL, and EFB enhanced flooded batteries used in cars, vans, trucks, motorcycles, and other vehicles.<\/p>\n <\/article>\n

\n

14 Language Settings<\/h3>\n

Supports English, Portuguese, Spanish, French, German, Italian, Russian, Turkish, Thai, Japanese, Traditional Chinese, Simplified Chinese, Korean, and Polish.<\/p>\n <\/article>\n

\n

Portable Storage Bag<\/h3>\n

The host and accessories can be stored together in the included bag, helping protect the tester and making it easier to carry between vehicles or work areas.<\/p>\n <\/article>\n <\/div>\n\n

\n
\"AUTOOL\n Click to enlarge<\/span>\n <\/figure>\n
\"AUTOOL\n Click to enlarge<\/span>\n <\/figure>\n
\"AUTOOL\n Click to enlarge<\/span>\n <\/figure>\n
\"AUTOOL\n Click to enlarge<\/span>\n <\/figure>\n
\"AUTOOL\n Click to enlarge<\/span>\n <\/figure>\n <\/div>\n <\/section>\n\n
\n
\n
\n \"AUTOOL\n \n Click to enlarge<\/span>\n <\/figure>\n
\n
Compatibility And Fitment<\/div>\n

Compatibility And Fitment<\/h2>\n

BT760 is designed for 12V \/ 24V lead-acid battery systems and supports common battery test standards. Confirm lithium support and charger needs before ordering.<\/p>\n

\n
Supported Battery Types<\/span>Regular flooded lead-acid, AGM flat plate, AGM spiral, GEL, and EFB enhanced flooded batteries.<\/strong><\/div>\n
Vehicle Applications<\/span>Cars, vans, trucks, motorcycles, RVs, ATVs, SUVs, boats, yachts, mowers, golf carts, and similar 12V \/ 24V systems.<\/strong><\/div>\n
Test Standards<\/span>CCA, IEC, EN, DIN, JIS, GB, and other available standards depending on the selected test menu and firmware version.<\/strong><\/div>\n
Not For Lithium Batteries<\/span>BT760 does not support lithium battery testing. Choose BT960 if lithium battery support is required.<\/strong><\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/section>\n\n
\n
\n
Before You Order And Use<\/div>\n

Before You Order And Use<\/h2>\n

Review these limits before choosing BT760. The tester is for battery system diagnosis, not battery charging or lithium battery service.<\/p>\n <\/div>\n

\n
\n

Tester, Not Charger<\/h3>\n

BT760 tests battery and electrical system condition. It does not charge batteries and should not be purchased as a battery charger.<\/p>\n <\/article>\n

\n

No Lithium Battery Support<\/h3>\n

BT760 supports common lead-acid battery types. It does not support lithium batteries; use BT960 if lithium testing is required.<\/p>\n <\/article>\n

\n

No Software Upgrade<\/h3>\n

The BT760 comparison chart lists software upgrade as not supported. Confirm firmware or language requirements before ordering if needed.<\/p>\n <\/article>\n

\n

Connect Clamps Correctly<\/h3>\n

Connect the red clamp to the positive pole and the black clamp to the negative pole. Shake the clamps gently to confirm a stable connection before testing.<\/p>\n <\/article>\n

\n

Reverse Polarity Protection<\/h3>\n

Reverse polarity protection helps protect the tester, vehicle, and battery during common connection mistakes.<\/p>\n <\/article>\n

\n

Low Voltage Check<\/h3>\n

If the measured battery voltage is too low, normal testing may not continue. Follow the on-screen prompts and manual guidance.<\/p>\n <\/article>\n <\/div>\n <\/section>\n\n

\n
\n
Specifications<\/div>\n

AUTOOL BT760 Product Specifications<\/h2>\n

BT760 includes a 3.2-inch color screen, built-in thermal printer, 8-30V voltage measurement range, 15mA-5A current measurement range, and multiple battery test standards for workshop battery diagnosis.<\/p>\n <\/div>\n\n

\n
\n \n\n
Core Product<\/td><\/tr>\n
Product<\/td>AUTOOL BT760 Battery System Tester<\/td><\/tr>\n
Display<\/td>3.2-inch HD color screen<\/td><\/tr>\n
Printing<\/td>Built-in thermal printer<\/td><\/tr>\n
Data Records<\/td>Supported<\/td><\/tr>\n
Software Upgrade<\/td>Not supported<\/td><\/tr>\n
Power Supply<\/td>Connect 12V battery<\/td><\/tr>\n
Applicable Battery Rated Voltage<\/td>12V \/ 24V<\/td><\/tr>\n
Dimensions Shown<\/td>214 \u00d7 98 \u00d7 40mm \/ 8.42 \u00d7 3.85 \u00d7 1.57in<\/td><\/tr>\n\n
Testing Functions<\/td><\/tr>\n
Battery Test<\/td>Supported<\/td><\/tr>\n
Cranking Test<\/td>Supported<\/td><\/tr>\n
Charging System Test<\/td>Supported<\/td><\/tr>\n
Maximum Load Test<\/td>Supported<\/td><\/tr>\n
Battery Charge<\/td>Not supported<\/td><\/tr>\n
Measured Data<\/td>Voltage, current, resistance, state of health, state of charge, ripple analysis, cranking, charging, and load data<\/td><\/tr>\n\n
Measurement Range<\/td><\/tr>\n
Voltage Measurement Range<\/td>8-30V<\/td><\/tr>\n
Current Measurement Range<\/td>15mA-5A<\/td><\/tr>\n
Operating Temperature<\/td>-20\u00b0C to 50\u00b0C<\/td><\/tr>\n\n
Battery Compatibility<\/td><\/tr>\n
Conventional Lead-Acid Batteries<\/td>Supported<\/td><\/tr>\n
AGM Flat Plate Batteries<\/td>Supported<\/td><\/tr>\n
AGM Spiral Batteries<\/td>Supported<\/td><\/tr>\n
GEL Batteries<\/td>Supported<\/td><\/tr>\n
EFB Enhanced Flooded Batteries<\/td>Supported<\/td><\/tr>\n
Lithium Batteries<\/td>Not supported<\/td><\/tr>\n\n
Test Standards And Ranges<\/td><\/tr>\n
CCA<\/td>30-2000<\/td><\/tr>\n
IEC<\/td>30-2500<\/td><\/tr>\n
EN<\/td>30-3000<\/td><\/tr>\n
DIN<\/td>30-2500<\/td><\/tr>\n
JIS<\/td>28A19R-N135<\/td><\/tr>\n
GB<\/td>30-300AH<\/td><\/tr>\n
Languages<\/td>14 languages<\/td><\/tr>\n <\/tbody>\n <\/table>\n <\/div>\n
\n
\n \"AUTOOL\n \n Click to enlarge<\/span>\n <\/figure>\n
\n \"AUTOOL\n \n Click to enlarge<\/span>\n <\/figure>\n <\/div>\n <\/div>\n
\n
\n Core Product<\/summary>\n
\n
Product<\/span>AUTOOL BT760 Battery System Tester<\/strong><\/div>\n
Display<\/span>3.2-inch HD color screen<\/strong><\/div>\n
Printing<\/span>Built-in thermal printer<\/strong><\/div>\n
Data Records<\/span>Supported<\/strong><\/div>\n
Software Upgrade<\/span>Not supported<\/strong><\/div>\n
Power Supply<\/span>Connect 12V battery<\/strong><\/div>\n
Applicable Battery Rated Voltage<\/span>12V \/ 24V<\/strong><\/div>\n
Dimensions Shown<\/span>214 \u00d7 98 \u00d7 40mm \/ 8.42 \u00d7 3.85 \u00d7 1.57in<\/strong><\/div>\n <\/div>\n <\/details>\n
\n Testing Functions<\/summary>\n
\n
Battery Test<\/span>Supported<\/strong><\/div>\n
Cranking Test<\/span>Supported<\/strong><\/div>\n
Charging System Test<\/span>Supported<\/strong><\/div>\n
Maximum Load Test<\/span>Supported<\/strong><\/div>\n
Battery Charge<\/span>Not supported<\/strong><\/div>\n
Measured Data<\/span>Voltage, current, resistance, state of health, state of charge, ripple analysis, cranking, charging, and load data<\/strong><\/div>\n <\/div>\n <\/details>\n
\n Measurement Range<\/summary>\n
\n
Voltage Measurement Range<\/span>8-30V<\/strong><\/div>\n
Current Measurement Range<\/span>15mA-5A<\/strong><\/div>\n
Operating Temperature<\/span>-20\u00b0C to 50\u00b0C<\/strong><\/div>\n <\/div>\n <\/details>\n
\n Battery Compatibility<\/summary>\n
\n
Conventional Lead-Acid Batteries<\/span>Supported<\/strong><\/div>\n
AGM Flat Plate Batteries<\/span>Supported<\/strong><\/div>\n
AGM Spiral Batteries<\/span>Supported<\/strong><\/div>\n
GEL Batteries<\/span>Supported<\/strong><\/div>\n
EFB Enhanced Flooded Batteries<\/span>Supported<\/strong><\/div>\n
Lithium Batteries<\/span>Not supported<\/strong><\/div>\n <\/div>\n <\/details>\n
\n Test Standards And Ranges<\/summary>\n
\n
CCA<\/span>30-2000<\/strong><\/div>\n
IEC<\/span>30-2500<\/strong><\/div>\n
EN<\/span>30-3000<\/strong><\/div>\n
DIN<\/span>30-2500<\/strong><\/div>\n
JIS<\/span>28A19R-N135<\/strong><\/div>\n
GB<\/span>30-300AH<\/strong><\/div>\n
Languages<\/span>14 languages<\/strong><\/div>\n <\/div>\n <\/details>\n <\/div>\n <\/section>\n\n\n\n
\n
\n
How To Use<\/div>\n

How To Use<\/h2>\n

Connect the clamps correctly, select the required test menu, follow the on-screen prompts, and print or record the result when needed.<\/p>\n <\/div>\n\n

\n
\n

Connect The Battery<\/h3>\n

Connect the red clamp to the positive pole and the black clamp to the negative pole of the 12V battery. Confirm that both clamps are firmly connected.<\/p>\n <\/article>\n

\n

Run Battery Test<\/h3>\n

Select the battery type, test standard, and test range. The tester displays battery health and related measurement results within seconds.<\/p>\n <\/article>\n

\n

Run Cranking Test<\/h3>\n

Select the cranking test function, then follow the prompts to start the engine and check starting system performance.<\/p>\n <\/article>\n

\n

Run Charging Test<\/h3>\n

Enter charging test mode, follow the prompt to raise engine speed to about 2500 RPM for 5 seconds, then press OK to complete the test.<\/p>\n <\/article>\n

\n

Run Max Load Test<\/h3>\n

Select maximum load test, turn on the vehicle\u2019s electrical appliances, start the engine, and press OK according to the screen prompt.<\/p>\n <\/article>\n <\/div>\n\n

\n
\n

Use Notes<\/h3>\n