{"id":45381,"date":"2024-06-24T17:34:12","date_gmt":"2024-06-24T09:34:12","guid":{"rendered":"https:\/\/shop.autooltech.com\/?post_type=product&p=45381"},"modified":"2026-05-15T06:42:02","modified_gmt":"2026-05-15T13:42:02","slug":"automotive-smoke-leak-detector-sdt60","status":"publish","type":"product","link":"https:\/\/autoolstore.com\/es\/product\/automotive-smoke-leak-detector-sdt60\/","title":{"rendered":"Automotive Smoke Leak Detector for EVAP Smoke Tests SDT60"},"content":{"rendered":"
\r\n
\r\n
\r\n
\r\n
AUTOOL SDT60<\/div>\r\n

Product Overview<\/h2>\r\n

The AUTOOL SDT60 Automotive Smoke Leak Detector is a compact 12V smoke leak detector with a built-in air pump, pressure gauge, and lightweight portable body. It helps diagnose leaks in automotive intake, exhaust, EVAP, fuel tank, pipe fitting, sealing, crankcase, coolant tank, throttle valve, intake manifold, and other suitable low-pressure systems without requiring an external air source.<\/p>\r\n

Bomba de aire integrada<\/span> 12V Battery<\/span> Pressure Gauge<\/span> EVAP \/ Vacuum<\/span><\/div>\r\n
\r\n
1.6kg<\/span>Main Unit<\/span><\/div>\r\n
<10psi<\/span>Presi\u00f3n de salida<\/span><\/div>\r\n
<5L\/min<\/span>Caudal de salida<\/span><\/div>\r\n
3 Years<\/span>Warranty<\/span><\/div>\r\n<\/div>\r\n<\/div>\r\n
\"AUTOOL Haz clic para ampliar<\/span><\/figure>\r\n<\/div>\r\n<\/section>\r\n
\r\n
\r\n
Antes de pedir y usar<\/div>\r\n

Antes de pedir y usar<\/h2>\r\n

Review the 12V power requirement, oil amount, airflow valve, continuous-use limit, temperature protection, and hot-surface reminder before each test.<\/p>\r\n<\/div>\r\n

\r\n
\r\n

Requiere bater\u00eda de 12V<\/h3>\r\n

The SDT60 must be connected to a DC 12V battery during use. Confirm correct power connection before starting the smoke test.<\/p>\r\n<\/article>\r\n

\r\n

Use Liquid Paraffin Or Baby Oil<\/h3>\r\n

Liquid paraffin and baby oil are both suitable testing liquids. Add 10-15ml before use, and do not exceed this range.<\/p>\r\n<\/article>\r\n

\r\n

Refill Correctly<\/h3>\r\n

When refilling, pour out the remaining oil first and add about 10ml fresh testing oil. Replace detector oil regularly.<\/p>\r\n<\/article>\r\n

\r\n

Open Airflow Regulator Gently<\/h3>\r\n

Before use, gently turn the knob to open the airflow regulator valve and allow the machine to output smoke properly.<\/p>\r\n<\/article>\r\n

\r\n

Avoid Continuous Overuse<\/h3>\r\n

Do not run the detector continuously for more than 8 minutes. Let the unit rest between tests to protect the machine.<\/p>\r\n<\/article>\r\n

\r\n

75\u00b0C Protection And Hot Surface<\/h3>\r\n

If the temperature exceeds 75\u00b0C, the intelligent protector automatically turns off power. The round metal section may become hot, so avoid direct contact.<\/p>\r\n<\/article>\r\n<\/div>\r\n<\/section>\r\n

\r\n
\r\n
Key Features<\/div>\r\n

Key Features<\/h2>\r\n

SDT60 combines a portable body, integrated air pump, pressure gauge, quick smoke output, and wide 12V vehicle coverage for home garage and professional workshop diagnostics.<\/p>\r\n<\/div>\r\n

\r\n
\r\n

Bomba de aire integrada<\/h3>\r\n

No external air source is required. The built-in air pump simplifies setup and lets users begin diagnosis immediately.<\/p>\r\n<\/article>\r\n

\r\n

Ligero y port\u00e1til<\/h3>\r\n

With an approx. 1.5-1.6kg lightweight body, SDT60 is easy to carry, store, and use in tight engine-bay spaces.<\/p>\r\n<\/article>\r\n

\r\n

Pressure Gauge Leak Judgment<\/h3>\r\n

The pressure gauge helps users judge leakage degree by observing pressure changes during pipeline testing.<\/p>\r\n<\/article>\r\n

\r\n

Rapid Smoke Generation<\/h3>\r\n

Press the smoke detector switch to generate smoke quickly. The pipe can fill with smoke within about 30 seconds.<\/p>\r\n<\/article>\r\n

\r\n

Protecci\u00f3n contra sobrecalentamiento y baja temperatura<\/h3>\r\n

The detector automatically powers off around 75\u00b0C for protection and can work normally even when the temperature reaches -20\u00b0C.<\/p>\r\n<\/article>\r\n

\r\n

Wide Vehicle And System Coverage<\/h3>\r\n

Suitable for 12V cars, motorcycles, snowmobiles, ATVs, light trucks, speedboats, intake, exhaust, EVAP, fuel tank, pipe fittings, and sealing leak checks.<\/p>\r\n<\/article>\r\n<\/div>\r\n

\r\n
\"AUTOOL Haz clic para ampliar<\/span><\/figure>\r\n
\"AUTOOL Haz clic para ampliar<\/span><\/figure>\r\n
\"AUTOOL Haz clic para ampliar<\/span><\/figure>\r\n
\"AUTOOL Haz clic para ampliar<\/span><\/figure>\r\n
\"AUTOOL Haz clic para ampliar<\/span><\/figure>\r\n
\"AUTOOL Haz clic para ampliar<\/span><\/figure>\r\n
\"AUTOOL Haz clic para ampliar<\/span><\/figure>\r\n
\"AUTOOL Haz clic para ampliar<\/span><\/figure>\r\n<\/div>\r\n<\/section>\r\n
\r\n
\r\n
How To Use<\/div>\r\n

How To Use<\/h2>\r\n

Use the SDT60 with suitable test oil and a DC 12V battery. Avoid smoke-sensitive parts during leak detection and allow the unit to rest between long tests.<\/p>\r\n<\/div>\r\n

\r\n
\r\n

A\u00f1adir aceite de prueba<\/h3>\r\n

Fill 10-15ml baby oil or liquid paraffin into the detector. Do not overfill. Open the engine cover and hang the detector if needed.<\/p>\r\n<\/article>\r\n

\r\n

Conecte el tubo de prueba<\/h3>\r\n

Disconnect the pipe that needs to be tested and connect it to the detector smoke output hose.<\/p>\r\n<\/article>\r\n

\r\n

Encendido<\/h3>\r\n

Connect the detector to a DC 12V battery, turn on the power switch, and let the detector start working.<\/p>\r\n<\/article>\r\n

\r\n

Check Leaks<\/h3>\r\n

The pipe fills with smoke within about 30 seconds. Check leak points visually and use a headlamp if necessary.<\/p>\r\n<\/article>\r\n<\/div>\r\n<\/section>\r\n

\r\n
\r\n
Especificaciones<\/div>\r\n

SDT60 Specifications<\/h2>\r\n

The SDT60 is a low-oxygen combustion smoke leak detector with built-in air pump output, 12V battery power, and pressure gauge support.<\/p>\r\n<\/div>\n

\n
\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n
Product And Power<\/td>\r\n<\/tr>\r\n
Producto<\/td>\r\nAUTOOL SDT60 Automotive Smoke Leak Detector<\/td>\r\n<\/tr>\r\n
Principio de funcionamiento<\/td>\r\nCombusti\u00f3n con bajo ox\u00edgeno<\/td>\r\n<\/tr>\r\n
Power Supply<\/td>\r\nBater\u00eda de 12V CC<\/td>\r\n<\/tr>\r\n
Air Pressure Output<\/td>\r\nBomba de aire integrada<\/td>\r\n<\/tr>\r\n
Pressure Gauge<\/td>\r\nYes<\/td>\r\n<\/tr>\r\n
Output And Size<\/td>\r\n<\/tr>\r\n
Presi\u00f3n de salida nominal<\/td>\r\n<10psi<\/td>\r\n<\/tr>\r\n
Caudal nominal de salida<\/td>\r\n<5L\/min<\/td>\r\n<\/tr>\r\n
Potencia nominal<\/td>\r\n50W<\/td>\r\n<\/tr>\r\n
Product Weight<\/td>\r\n1.6kg<\/td>\r\n<\/tr>\r\n
Gross Weight<\/td>\r\n2.7kg<\/td>\r\n<\/tr>\r\n
Dimensions<\/td>\r\n145mm \u00d7 200mm \u00d7 80mm<\/td>\r\n<\/tr>\r\n
Use And Protection<\/td>\r\n<\/tr>\r\n
Aceite de prueba<\/td>\r\nParafina l\u00edquida o aceite para beb\u00e9<\/td>\r\n<\/tr>\r\n
Recommended First Fill<\/td>\r\n10-15 ml<\/td>\r\n<\/tr>\r\n
Refill Amount<\/td>\r\nPour out remaining oil first, then add about 10ml fresh testing oil<\/td>\r\n<\/tr>\r\n
Smoke Output Reference<\/td>\r\nPipe fills with smoke within about 30 seconds<\/td>\r\n<\/tr>\r\n
Continuous Operation<\/td>\r\nDo not run continuously for more than 8 minutes<\/td>\r\n<\/tr>\r\n
Overheat Protection<\/td>\r\nAutomatic shutoff above 75\u00b0C<\/td>\r\n<\/tr>\r\n
Low-Temperature Operation<\/td>\r\nCan work normally at -20\u00b0C<\/td>\r\n<\/tr>\r\n
Warranty<\/td>\r\n3 a\u00f1os de garant\u00eda para casos elegibles de da\u00f1os no causados por el usuario<\/td>\r\n<\/tr>\r\n<\/tbody>\r\n<\/table>\r\n<\/div>\r\n
\"AUTOOL Haz clic para ampliar<\/span><\/figure>\r\n<\/div>\r\n<\/section>\r\n
\r\n
\r\n
\"AUTOOL Haz clic para ampliar<\/span><\/figure>\r\n
\r\n
Contenido de la caja<\/div>\r\n

Contenido de la caja<\/h2>\r\n

The SDT60 package image shows the main smoke leak detector, power clamps, smoke hose, adapters, oil tools, hook, user manual, and packaging. Confirm the final included items according to the product listing and shipping policy.<\/p>\r\n

\r\n
Main UnitAUTOOL SDT60 Smoke Leak Detector<\/strong><\/div>\r\n
Cable de alimentaci\u00f3n12V battery power cable \/ clamps<\/strong><\/div>\r\n
Manguera de humoManguera de salida de humo mostrada en la imagen del paquete<\/strong><\/div>\r\n
AdaptadoresRed cone \/ pipe adapters shown in the package image<\/strong><\/div>\r\n
Oil ToolsFunnel and oil bottle shown in the package image<\/strong><\/div>\r\n
GanchoHanging hook for engine bay use<\/strong><\/div>\r\n
ManualManual de usuario<\/strong><\/div>\r\n
L\u00edquido de pruebaUse liquid paraffin or baby oil; confirm whether liquid is included according to shipping policy<\/strong><\/div>\r\n<\/div>\r\n<\/div>\r\n<\/div>\r\n<\/section>\r\n
\r\n
\r\n
\r\n
Product Comparison<\/div>\r\n

Product Comparison<\/h2>\r\n

SDT60 is a lightweight built-in-pump model with pressure gauge support, ideal for users who want direct 12V smoke leak detection without an external air source.<\/p>\r\n

\r\n
SDT60 FocusBuilt-in air pump, pressure gauge, 12V power, 10-15ml test oil, <10psi output pressure, <5L\/min flow, 50W power, and 1.6kg main unit<\/strong><\/div>\r\n
Compared With SDT50SDT60 adds pressure gauge support, helping users observe pressure changes and determine leakage degree<\/strong><\/div>\r\n
Compared With SDT101 \/ SDT103SDT101 and SDT103 require an external air source; SDT60 has a built-in air pump<\/strong><\/div>\r\n
Compared With Higher ModelsSDT205 \/ SDT205S \/ SDT206 \/ SDT208 add air mode + smoke mode, flow meter, oil drain valve, fault indicator, oil level gauge, dual pumps, or dual pressure mode depending on model<\/strong><\/div>\r\n<\/div>\r\n<\/div>\r\n
\"AUTOOL Haz clic para ampliar<\/span><\/figure>\r\n<\/div>\r\n<\/section>\r\n
\r\n
\r\n
Related Products<\/div>\r\n

Related Products<\/h2>\r\n

Compare related AUTOOL smoke leak detector models before choosing the right built-in pump, pressure gauge, EVAP support, air \/ smoke mode, pressure range, and workshop function.<\/p>\r\n<\/div>\r\n

\r\n