{"id":34373,"date":"2022-07-21T18:24:06","date_gmt":"2022-07-21T10:24:06","guid":{"rendered":"https:\/\/shop.autooltech.com\/?post_type=product&p=34373"},"modified":"2026-05-15T06:42:02","modified_gmt":"2026-05-15T13:42:02","slug":"autool-sdt103-automotive-smoke-machine-leak-detector-for-evap-system-12v","status":"publish","type":"product","link":"https:\/\/autoolstore.com\/de\/product\/autool-sdt103-automotive-smoke-machine-leak-detector-for-evap-system-12v\/","title":{"rendered":"Rauchtester f\u00fcr Fahrzeuge f\u00fcr EVAP-System 12V- AUTOOL SDT103"},"content":{"rendered":"
\r\n
\r\n
\r\n
\r\n
AUTOOL SDT103<\/div>\r\n

Produkt\u00fcbersicht<\/h2>\r\n

The AUTOOL SDT103 smoke leak detector is an EVAP-focused automotive smoke tester for low-pressure pipe leak checks. It uses an external air source, DC12V vehicle battery power, 10-15ml liquid paraffin or baby oil, and a visual airflow meter to help technicians locate small leaks in EVAP, intake, exhaust, fuel tank, pipe fitting, and vehicle sealing systems more efficiently.<\/p>\r\n

Externe Luftquelle<\/span> DC12V-Batterie<\/span> EVAP 3.2kPa<\/span> 10-15ml Test\u00f6l<\/span><\/div>\r\n
\r\n
3.2kPa<\/span>EVAP-Ausgangsdruck<\/span><\/div>\r\n
>10L\/min<\/span>Nennausgangsdurchfluss<\/span><\/div>\r\n
48W<\/span>Nennleistung<\/span><\/div>\r\n
3 Jahre<\/span>Garantie-Support<\/span><\/div>\r\n<\/div>\r\n<\/div>\r\n
\"AUTOOL Zum Vergr\u00f6\u00dfern klicken<\/span><\/figure>\r\n<\/div>\r\n<\/section>\r\n
\r\n
\r\n
Vor Bestellung und Gebrauch<\/div>\r\n

Vor Bestellung und Gebrauch<\/h2>\r\n

Before ordering or using SDT103, confirm the external air source requirement, DC12V power supply, testing oil rule, airflow regulator, operating time limit, and hot-surface warning.<\/p>\r\n<\/div>\r\n

\r\n
\r\n

Externe Luftquelle erforderlich<\/h3>\r\n

SDT103 does not have a built-in air pump. It must be connected to an external air source or shop air compressor before smoke testing.<\/p>\r\n<\/article>\r\n

\r\n

DC12V-Batterie erforderlich<\/h3>\r\n

Connect the SDT103 automotive smoke tester to a DC12V vehicle battery. Do not use it without the proper 12V power supply.<\/p>\r\n<\/article>\r\n

\r\n

Open The Airflow Regulator<\/h3>\r\n

Before use, gently turn the airflow regulator valve to open airflow. The flow meter helps observe the current airflow volume during testing.<\/p>\r\n<\/article>\r\n

\r\n

Pr\u00fcf\u00f6l nicht enthalten<\/h3>\r\n

Testing liquid is not included due to logistics restrictions. Buy liquid paraffin or baby oil locally for use as testing oil.<\/p>\r\n<\/article>\r\n

\r\n

Fill 10-15ml Only<\/h3>\r\n

For first use, fill 10-15ml testing oil. Do not exceed this range, and do not add more than 15ml each time.<\/p>\r\n<\/article>\r\n

\r\n

Refill Only When Smoke Gets Thin<\/h3>\r\n

Add fresh oil only when smoke becomes thin. Before adding fresh oil, pour out the remaining oil and replace detector oil regularly.<\/p>\r\n<\/article>\r\n

\r\n

8-Minute Continuous Use Limit<\/h3>\r\n

Do not run the detector continuously for more than 8 minutes. Allow interval rest between tests to protect the unit.<\/p>\r\n<\/article>\r\n

\r\n

Schutz bei 75 \u00b0C<\/h3>\r\n

If the device exceeds the working limit, such as over 75\u00b0C, the intelligent protection system turns off the power. Operate it again after it cools down.<\/p>\r\n<\/article>\r\n

\r\n

Hot Surface Warning<\/h3>\r\n

The round metal section of the detector can become hot during operation. Avoid direct contact to prevent burns.<\/p>\r\n<\/article>\r\n<\/div>\r\n

\r\n
\r\n

Sicherheitshinweis<\/h3>\r\n