{"id":59103,"date":"2025-08-19T06:48:07","date_gmt":"2025-08-19T06:48:07","guid":{"rendered":"https:\/\/shop.autooltech.com\/?post_type=product&p=59103"},"modified":"2026-05-15T06:42:02","modified_gmt":"2026-05-15T13:42:02","slug":"autool-sdt100-smoke-tester-for-vacuum-leaks","status":"publish","type":"product","link":"https:\/\/autoolstore.com\/da\/product\/autool-sdt100-smoke-tester-for-vacuum-leaks\/","title":{"rendered":"AUTOOL SDT100 Smoke Tester for Vacuum Leaks"},"content":{"rendered":"
\n
\n
\n
\n
AUTOOL SDT100<\/div>\n

Product Overview<\/h2>\n

The AUTOOL SDT100 smoke tester is a compact automotive smoke leak detector with a built-in air pump for quickly detecting vacuum, EVAP, intake, exhaust, crankcase, fuel tank, oil seal, coolant tank, and low-pressure turbo system leaks. It runs on a DC 12V battery, uses 10-15ml liquid paraffin or baby oil as testing oil, and is suitable for cars, motorcycles, ATVs, snowmobiles, off-road vehicles, light trucks, and speedboats.<\/p>\n

\n Built-In Air Pump<\/span>\n 12V Battery<\/span>\n EVAP \/ Vacuum<\/span>\n 10-15ml Test Oil<\/span>\n <\/div>\n
\n
0.1-0.15MPa<\/span>Rated Pressure<\/span><\/div>\n
48W<\/span>Rated Power<\/span><\/div>\n
1.6kg<\/span>Main Unit<\/span><\/div>\n
3 Years<\/span>Warranty<\/span><\/div>\n <\/div>\n <\/div>\n
\n
\n \"AUTOOL\n \n Click to enlarge<\/span>\n <\/figure>\n
\n \"AUTOOL\n \n Click to enlarge<\/span>\n <\/figure>\n <\/div>\n <\/div>\n <\/section>\n\n
\n
\n
Before You Order And Use<\/div>\n

Before You Order And Use<\/h2>\n

Review the 12V power requirement, testing oil rule, operating time limit, overheat protection, and hot-surface warning before using the SDT100 smoke test machine.<\/p>\n <\/div>\n

\n
\n

12V Battery Required<\/h3>\n

The SDT100 automotive smoke tester must be connected to a DC 12V battery to operate.<\/p>\n <\/article>\n

\n

Testing Oil Not Included<\/h3>\n

Due to logistics restrictions, testing oil is not included. Buy liquid paraffin or baby oil locally for use as the testing fluid.<\/p>\n <\/article>\n

\n

Add 10-15ml Only<\/h3>\n

Fill 10-15ml testing oil before use. Do not exceed this range, because overfilling leaves no space for smoke generation.<\/p>\n <\/article>\n

\n

Refill When Smoke Becomes Thin<\/h3>\n

Only refill when smoke becomes thin. Do not add more than 15ml at a time, and drain remaining test oil before adding fresh oil.<\/p>\n <\/article>\n

\n

8-Minute Use Limit<\/h3>\n

Do not operate the smoke leak detector continuously for more than 8 minutes. Allow it to rest between uses.<\/p>\n <\/article>\n

\n

75\u00b0C Protection<\/h3>\n

The intelligent protection system automatically shuts off if internal temperature exceeds 75\u00b0C. Wait for the unit to cool before restarting.<\/p>\n <\/article>\n <\/div>\n

\n
\n

Safety Reminder<\/h3>\n